Manual Gorenje b 8980 (page 3 of 14) (English)

330553

Zoom out

Zoom in

1/14

Instructions for use, installation and connection

• Preheating of oven is necessary only if recommended by the

recipe or if written in the chart below.

• Heating of empty oven consumes a lot of energy. Save it by

baking several pizzas or cakes consecutively, one after the

another, while the oven is still warm from the previous

one.Towards the end of baking, the oven may be switched

off about 10 minutes before the pletion, thereby making use

of the remaining.

Oven

Electronic program clock with temperature display

1 – Timer

2 – Period of operation

3 – End of operation

4 – Reset

5 – Setting button (+) and (-) (certain models only)

Note: This button is operated the following way: to increase

settings (+) turn it to the right and hold in that position, and to

decrease settings (-) turn it to the left and hold!

Setting the time of day

After connecting the appliance to the mains, the display

indicates flashing zeros (0.00) and AUTO. Press buttons (2)

and (3) at the same time (and release them). When symbol

(S4) starts flashing, use button (5) to set the exact time of day.

When the symbol (S4) stops flashing, the clock starts running.

After setting the time of day, the clock is ready for operation.

Semi-automatic mode with defined period of operation

Press button (2). Display indicates 0.00 and flashing 'AUTO'

(symbol (S3)). Use button (5) to set the desired period of

operation. Time can be set in 1 minute periods. Maximum

preset period of operation is 10 hours.

When the desired time is set after a few seconds the symbol

‘AUTO' stops flashing and the countdown begins. The display

indicates oven temperature. By pressing the button (2) you can

check the remaining time and correct it if required. When the

countdown is completed, a beep is heard (symbol 'AUTO' is

flashing). The oven is automatically shut off and the preset

temperature is erased!

Sound signal is switched off automatically after 5 minutes, if it

is not stopped before by pressing any button (symbol ‘AUTO’

goes off).

Semi-automatic mode with preset end of operation

Press button (3) and the display indicates time of day along

with flashing 'AUTO'. Use button (5) to set the end of operation

time (this must naturally be more than the actual time of day).

Once the end time is set, the symbol 'AUTO' stops flashing

after a few seconds, and the display indicates oven

temperature.

When the time of day reaches the preset end time of roasting,

sound signal indicates the end of operation (symbol 'AUTO' is

flashing). Oven is automatically switched off and the preset

temperature is deleted!

Sound signal is switched off automatically after 5 minutes, if it

is not stopped before by pressing any button (symbol ‘AUTO’

goes off).

Automatic mode with preset period and end of

operation

Press button (2) and use button (5) to set the desired time.

Then press button (3) and the display indicates the nearest

possible time of the end of operation.

Symbol (S2) goes off and 'AUTO' is on if the end time is higher

than the actual time of day + period of operation. Oven is in the

stand-by mode and starts operating automatically according to

the preset times.

Example:

Time of day = 12:00, operation period is set to 1:30, end of

operation at 14:00. This means that oven will start working at

12:30.

Timer

Timer is used to perform only the signaling function, and it

does not switch the oven off.

By pressing button (1) display indicates 0.00 and (S1) is

flashing. Use button (5) to set the desired time. After a few

seconds the symbol (S1) stops flashing, and the countdown

starts.

Display indicates time of day or oven temperature (if the oven

is in operation).

By pressing button (1) you can check the remaining time and

correct it as required.

When the countdown is completed, a flashing symbol (S1)

appears and the end is signaled by the beep, which goes off

automatically if it is not interrupted by pressing any button.

Deletion of any time-related program and/or

temperature

Any time settings and the temperature, except the timer, may

be deleted at any time by pressing button (4) for 3 seconds.

Preset time programs and the temperature are automatically

stopped.

Attention:

If you press button (4) for 3 seconds during oven

operation, the preset temperature is erased and oven is

automatically switched off.

How do I switch off the auto button on goranje oven timer. Submitted on 24-6-2021 at 13:24
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje b 8980 in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gorenje b 8980 Manual

Product: