484818
22
Zoom out
Zoom in
Previous page
1/47
Next page
PRO TIPS: ATTACHING ADHESIVE MOUNTS
Clean the surface first. Be sure to carefully clean the surface where you will
be attaching your adhesive mount. Wax, oil, dirt and other debris will reduce
adhesion, which can result in a weak bond and the risk of losing your camera
if the bond fails.
Only attach a mount in room temperature conditions. The mount’s adhesive
will not bond properly if applied in cold or damp environments, though it is
entirely safe to use in cold conditions. For best results, attach your mount 24
hours before use in cold environments to ensure the strongest hold.
Surfaces. The adhesive mounts can only be mounted to a smooth surface.
Porous or textured surfaces will not provide for a proper bond. When
applying the mount, firmly press mount into place ensuring full contact over
entire surface area. Allow at least 24 hours for full bond strength.
Drying time. For best results, attach your mount at a minimum of 24 hrs
before use.
LOCKING PLUG
This locking plug is designed for high impact sports like surfing
or skiing where significant impact can occur. The locking plug
locks the attachment buckle’s fingers in place, helping to prevent
accidental housing release from mounts.
CAMERA ASSEMBLY FCC STATEMENT
Modifications not approved by the party responsible for compliance could void
user’s authority to operate the equipment. This equipment has been tested and
found to comply with the limits for Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates and can
radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio or television reception, which
can be determined by turning the equipment on and off
.
The user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
42 43
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for GoPro HD Hero 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of GoPro HD Hero 2 in the language / languages: English, Dutch as an attachment in your email.

The manual is 1,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of GoPro HD Hero 2

GoPro HD Hero 2 User Manual - German - 45 pages

GoPro HD Hero 2 User Manual - French - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info