735169

Goobay 51301 Manual

14
Zoom out
Zoom in
Previous page
1/42
Next page
13
User manual
3 Intended Use
We do not permit using the device in other ways like described in chapter
“Description and Function“ and „Safety Instructions“.
These timers are ONLY intended for connection to German socket outlets
with earthing contact. Otherwise a correct connection with the protective con-
ductor and thus a safe protection against electric shock cannot be guaran-
teed. Not attending to these regulations and safety instructions might cause
fatal accidents, injuries, and damages to persons and property.
IP20 This product is protected against medium sized foreign objects, but
not against water ingress.
IP44 This product is protected against splash and contact with foreign
objects of Ø1 mm.
4 Connecting
Plug the time switch into a well reachable mains socket.
5 Settings
5.1 Setting Time and Weekday
1. Press the CLOCK button and hold it.
2. Press the WEEK button so often as needed by additionally hold CLOCK
button, until the correct weekday is displayed.
3. Press the HOUR button so often as needed by additionally hold CLOCK
button, until the correct hour is displayed.
4. Press the MINUTE button so often as needed by additionally hold
CLOCK button, until the correct minute is displayed.
5. Release all buttons.
Weekday and time are set.
5.2 12/24 h display
Press CLOCK and TIMER simultaneously.
The display changes between 12 and 24 h mode.
5.3 Summer time function
1. Press the CLOCK and ON/AUTO/OFF button simultaneously.
SUMMER is displayed.
Time is put forward by 1 hour.
2. Press both buttons again to change to winter time.
5.4 Programming switching times
There are maximum 10 switching time programs settable.
These can be set to a minimum of 1 per minute increments.
• Assure, that the set switching times do not overlap each other, especially
when programming week settings.
If switching times overlap, the time switch carries out ON or OFF according
the programmed switching times.
Is ON and OFF programmed simultaneously by 2 different program settings,
OFF will be carried out.
Programming is only available in AUTO mode.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Goobay 51301 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Goobay 51301 in the language / languages: English, German, Danish, French, Italian as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info