735200
17
Zoom out
Zoom in
Previous page
1/152
Next page
17
4.2 Installing
Risk of injury by stumbling and falling
Place, install and transport product, product ts and accessories
in a safe way.
Injury by cutting
Do not touch the edges of the rotor.
The rotor is sharp-edged.
1. LoosentheL-xingscrew(4)fromthe
stand.
2. Unscrew them counterclockwise.
Fig. 11 a).
3. Remove the washer (5) from the
stand (3).
4. Place the insert in the base as shown in
Fig. 11 b).
5. Place the stand on the base. Fig. 11 c).
Thestandmustslideintothespecied
recess.
6. Turn stand and base upside down.
The holes in the base and stand must be on
top of each other.
7. First place the washer on the hole in the
base.
8. InserttheL-xingscrewthroughthewasher
and the hole in the insert and stand.
9. Tighten the L-screw clockwise. Fig. 11 d).
F i g. 11 : Mounting Base
10. Turn the stand base unit upside down
again.
11. Unscrew the 4 Phillips screws (6) from the
engine block by turning them counter-
clockwise. Fig. 12 a)
12. Push the rear protective grille (7) with the
handle upwards onto the motor axis (14).
The eyelets in the protective grille (12) must be
ushwiththeholes(13)intheengineblock.
Fig. 12 a).
13. Insert the 4 Phillips screws through the
eyelets in the protective grille and into the
holes of the engine block (13).
Fi g . 12 : Mounting rear part protective grills 14. Tighten the Phillips head screws clockwise.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Goobay 39513 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Goobay 39513 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Turkish, Spanish, Finnish as an attachment in your email.

The manual is 2,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info