650414
12
Zoom out
Zoom in
Previous page
1/52
Next page
115
escription of the SW1 configuration dip-switch of
D
the sound module.
Placed to OFF if the EL631/Plus module is configured as EL500
.
Set to ON if the EL631/Plus module is configured as EL501
(general door panel).
operating
mode
operating mode
Selects the d done from the ('AP'
terminal), see page 149.
Placed to ON: door opening timed at 3 seconds.
Set to OFF:dooropeningtimedat15seconds.
oor opening time, external push button
Selects the type of cable to be used for the video signal.
Placed to OFF:coaxialcableRG-59 o RG-11.
Set to ON: twisted pair.
Placed to OFF if the door panel has telecamera. In case of door panels
without telecamera (EL640 Plus sound module) set to ON.
Plus system, loads the installation with a communications resistor Plus. For a
proper system operation, placed to ON only in the closest door panel to the
backbone installation or in the general door panel (if exists), set the rest to
OFF.
Set to ON so that the volume tone emitted by the door panel:
(call reception, busy system and lock release) are HIGH, or placed to OFF if a
LOW volume tone is desired.
Uno System,
proper system operation, set to ON only in the closest door panel to the
backbone installation, placed the rest to OFF.
Withdigital repeater RD Plus/Uno:
In the backbone installation or after the inner door panel in systems with
general door panels, placed the door panel/s to OFF.
loads the installation with a communications resistor Uno. Fora
6
6
7
6
7
6
Placed to ON,
porter's exchange (if exists).Set to OFF, the call is received in the apartment.
In general door panels systems with porter's exchange, this function is only
applicable to the general door panels not to the inner door panel/s.
the calls made on the door panel will be transferred to the
Factory default
6
7
8
6
7
8
The SW1 configuration dip-switch is located at the upper right
side of the back of the module.
For dip switch settings,
use the tool that is supplied with the
sound module.
DOOR PANEL INSTALLATION
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Golmar T631 Plus Nexa at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Golmar T631 Plus Nexa in the language / languages: English as an attachment in your email.

The manual is 2,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info