654675
5
Zoom out
Zoom in
Previous page
1/12
Next page
Golden Mask 5 User Guide
GMD - www.goldenmaskdetectors.com - Golden Mask Ocial Reseller
8
Golden Mask 5 User Guide
GMD - www.goldenmaskdetectors.com - Golden Mask Ocial Reseller
9
After the frequency shift conrmation, the main screen will appear and you will see the
new frequency in parameters row at the top of the LCD screen.
WARNING!
After changing the frequency, a RESET is required
for the detector to work properly!
Selecting the discrimination mode (DM)
To select the discrimination mode, press the DISC MODE | DISC LEVEL button at the
middle-left. A selection screen will appear to select between discrimination mode and
discrimination level.
Select the DISC MODE option and conrm with ENTER.
After you select and conrm the DISC MODE option, a selection screen with three options
will appear - Mono, 2 and All, as shown on the next graphic.
As you can guess, select and conrm your choice is done by pressing the + and - buttons
and then the ENTER button.
DISC MODE DISC LEVEL
SELECT
Discrimination modes explained
The Golden mask 5 does NOT have a regular discrimination setting as many other detec-
tors have. What this means? To better understand the iron discrimination and how it works
with most detectors, think about this setting as the border line between iron and all other
metals. Because not all iron objects return the same signal, it is hard to set this border
properly. For example, a large iron object returns a signal similar to non-ferrous metals.
A small piece of thin aluminium foil produces a signal similar to small iron object and so
on. To make it easier for the GM5 users, the Golden mask engineers decided to x this
border. The exact value was found after 2 months of tests with hundreds of ferrous and
non-ferrous objects, and this value is set to securely discern the most part of the ferrous
objects and in the same time to keep all the good targets. This way you will sometimes dig
iron objects, but you won’t lose any small gold coins or small gold jewellery, that could be
easily descriminated out by rising-up the discrimination border on a “regular” detector.
1. Mono-tone (mono)
In Mono discrimination mode, the detector produces sound for non-ferrous targets only.
The signal from ferrous targets (iron) is masked. However, some rusty iron or big iron ob-
jects could produce sound, but with practice you’ll learn to securely distinguish the sound
response from iron - it is harsh and choppy, not as sharp and obvious as the non-ferrous
targets sound. The Spectrum VDI scale helps to easily identify targets.
The Mono-tone mode is good for iron-polluted areas with lots of trash. Pay attention for
every sharp signal and try not to pay attention to the chattering from the iron targets,
In Mono mode, the Golden Mask 5 is a little bit deeper than in bitonal mode and handles
better the deep iron signals, if the Discrimination level (DL) is set properly. You will learn
about setting the DL level and how it works in the next chapter.
DISC MODE
mono All2
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for GoldenMask 5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of GoldenMask 5 in the language / languages: English as an attachment in your email.

The manual is 2,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of GoldenMask 5

GoldenMask 5 Quick start guide - English - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info