656012
8
Zoom out
Zoom in
Previous page
1/16
Next page
Setting the Transmitter
Mode Setting
1. Short press the <MODE> Button, and the
mode of the current group will change.
2. To NON-GR grouping mode, all the groups’
modes will be changed simultaneously by
the order of TTL/M/Multi, in accordance
with Ratio flash mode. To GR grouping
mode, only the current group’s mode will
be changed by the order of TTL/M/--.
Current Group Settings
1. Short press the <GR> Button to set the
current group.
2. The current group settings will blink and
turn the Select Dial to change the settings.
3. When the current group is in the M mode,
the power output value is changeable from
1/1 full power to Min.[Note 1] power in 0.3
stop increments. When the current group
is in the TTL mode, the FEC amount is changeable
from -3 to 3 in 0.3 stop increments. When the current group is in the -- mode (flash
off), the amounts will not change.
4. Short press the <GR> Button again to confirm the setting.
Multi Flash Settings (Times & Frequency)
1. In the multi flash (TTL and M icon are not
displayed), long press the <MODE> Button to
enter multi flash setting submenu.
2. The two lines are separately displayed as T
(flash times) and H (flash frequency).
3. Short press the <GR> Button to choose the
related setting amounts. Turn the Select Dial
to change the blinking settings.
4. Continue to short press the <GR> Button, and the blinking settings on the next line can
be changed.
5. Until all the amounts are set. Short press the <MODE> Button to exit the setting status.
6. In the multi flash setting submenu, short press the <MODE> Button to return to main
menu.
Multi Flash Settings (Output Value)
1. In the multi flash (TTL and M icon are not
displayed), short press the <GR> Button to
set the current group.
2. In multi flash mode, the power output will be
changed from Min. to 1/4.
Setting the Transmitter
[Note 1]
Min. refers to the minimum power output value that can be set in M/Multi mode.
X1C's minimum power output value is 1/128 for most of camera flashes. However, the value can
change to 1/256 when using in combination with Godox strong power flashes e.g. AD600, etc.
Note: As flash times are restricted by flash output value and flash frequency, the flash times
cannot surpass the upper value that permitted by the system.
The times that transported to the receiver end are a real flash time, which is also related to the
camera's shutter setting.
- 35 - - 36 -
CH
Gr
CH
Gr
CH
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Godox X1C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Godox X1C in the language / languages: English as an attachment in your email.

The manual is 4,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info