Manual Godox V860IIN (page 13 of 14) (English)

656032

Zoom out

Zoom in

1/14

Technical Data

- 49 - - 50 -

V860IIN

Nikon DSLR cameras (i-TTL autoflash)

60 (m ISO 100)

190 (feet ISO 100)

20 to 200mm (14mm with wide panel)

• Auto zoom (Flash coverage set automatically

to match the lens focal length and image size)

• Manual zoom

• Swinging/tilting flash head (bounce flash): 0 to 360°

horizontally and -7° to 90° vertically

1/300 to 1/20000 seconds

i-TTL autoflash and manual flash

Manual. FEB: ±3 stops in 1/3 stop increments

(Manual FEC and FEB can be combined.)

High-speed sync (up to 1/8000 seconds),

first-curtain sync, and second-curtain sync

Provided (up to 90 times, 100Hz)

Master, Slave, Off

3 (A, B, and C)

Indoors: 12 to 15 m / 39.4 to 49.2 ft.

Outdoors: 8 to 10 m / 26.2 to 32.8 ft.

Master unit reception angle: ±40° horizontally,

±30° vertically

100m

4 (1, 2, 3, and 4)

32 (1~32)

Two red indicators blink

Fired with camera’s depth-of-field preview button

Center: 0.6~10m / 2.0~32.8 feet

Periphery: 0.6~5m / 2.0~16.4 feet

11.1V/2000mAh Li-ion polymer battery

<1.5 seconds. Red LED indicator will light up when

the flash is ready.

Approx. 650

Power off automatically after approx. 90 seconds

of idle operation. (60 minutes if set as slave)

Hotshoe, 2.5mm sync line, Wireless control port

5600±200k

64*76*190 mm

430g

540g

Model

• Type

Compatible Cameras

Guide No.

(1/1 output @ 200mm)

Flash Coverage

Flash Duration

• Exposure Control

Exposure control system

Flash exposure

compensation (FEC)

Sync mode

Multi flash

• Wireless Flash (Optic transmission and 2.4G transmission)

Wireless flash function

Controllable slave groups

Transmission Optic

range

(approx.)

2.4G

Channels Optic

2.4G

Slave-ready indicator

Modeling flash

• Auto Focus Assist Beam

Effective range (approx.)

• Power Supply

Power source

Recycle time

Full power flashes

Power saving

• Sync Triggering Mode

• Color Temperature

• Dimensions

W x H x D

Weight without battery

Weight with battery

Protection Function

1. Over-Temperature Protection

● To avoid overheating and deteriorating the flash head, do not fire

more than 30 continuous flashes in fast succession at 1/1 full

power. After 30 continuous flashes, allow a rest time of at least 10

minutes.

● If you fire more than 30 continuous flashes and then fire more

flashes in short intervals, the inner over-temperature protection

function may be activated and make the recycling time over 10

seconds. If this occurs, allow a rest time of about 10 minutes, and

the flash unit will then return to normal.

● When the over-temperature protection is started, is shown on

the LCD display.

Number of flashes that will activate over-temperature

protection:

Meaning

A failure occurs on the recycling system so that the

flash cannot fire.

Please restart the flash unit. If the problem still exists,

please send this product to a maintenance center.

The system gets excessive heat. Please allow a rest

time of 10 minutes.

The voltage on two outlets of the flash tube is too high.

Please send this product to a maintenance center.

There are some errors occurred during the upgrading

process. Please using the correct firmware upgrade

method.

Prompts on LCD Panel

2. Other Protections

The system provides real-time protection to secure the device and

your safety. The following lists prompts for your reference:

Number of flashes that will activate over-temperature

protection in high-speed sync triggering mode:

Power Output Level

1/1

1/2 +0.7

1/2 +0.3

1/2

1/4(+0.3,+0.7)

1/8(+0.3,+0.7)

1/16(+0.3,+0.7)

1/32(+0.3,+0.7)

1/64(+0.3,+0.7)

1/128(+0.3,+0.7)

Number of Flashes

100

200

300

500

1000

Power Output

1/1

1/2(+0.3,+0.7);

1/4(+0.3,+0.7)

1/8(+0.3,+0.7);

1/16(+0.3,+0.7)

1/32(+0.3,+0.7);

1/64(+0.3,+0.7);

1/128(+0.3,+0.7);

Times

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Godox V860IIN in the language / languages: English as an attachment in your email.

The manual is 7,94 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Godox V860IIN Manual

Product: