656033
9
Zoom out
Zoom in
Previous page
1/22
Next page
INSTRUCTION MANUAL
说 明 手 册
中英文双语 / Chinese English Bilingual
在使用本产品之前:
请先仔细阅读本手册,以确保您能安全使用。请保存好本手册以备将来
查询参考。
Before using this product:
Please read this user manual carefully in order to ensure your safety
and the proper operation of this product. Keep for future reference.
锂电机顶闪光灯
Pioneering Li-ion Camera Flash
- 19 -
Foreword
Thank you for purchasing a GODOX product.
V850II Li-ion camera ash adopts Godox wireless X system and 2.4G
ratio transmission, which is compatible with AD360II-C, AD360II-N,
TT685C, TT685N, X1T-C, X1T-N, etc. Fit all DSLR camera brands
e.g. Canon, Nikon, Sony, etc.
This V850II camera ash features:
GN60 (m ISO 100, @200mm). Adjust from 1/1 to 1/128 in
1/3rd stops
Built-in 2.4G wireless transmission to support transmitting and
receiving
High speed sync, wireless remote control, multi flash and
manual focus assist
Stable consistency and color temperature with good even
lighting
• User-friendly LCD display & control panel
- 20 -
For Your Safety
Always keep this product dry. Do not use in rain or in damp
conditions.
• This product contains high-voltage electronic parts. Touching
the high-voltage circuit inside it may result in electric shock. Do
not disassemble. Should repairs become necessary, this
product must be sent to an authorized maintenance center.
• Stop using this product if it breaks open due to extrusion,
falling or strong hit. Otherwise, electric shock may occur if you
touch the electronic parts inside it.
• Do not re the ash directly into the eyes (especially those of
babies) within short distances. Otherwise visual impairment
may occur. When taking pictures for babies, keep the ash unit
at least 1 meter (3.3 feet) away from them. Using bounce ash
to reduce light intensity is also recommended.
• Do not use the ash unit in the presence of ammable gases,
chemicals and other similar materials. In certain circumstances,
these materials may be sensitive to the strong light emitting
from this ash unit and re or electromagnetic interference may
result.
• Do not leave or store the ash unit in places where the ambient
temperature reads over 50°C (e.g. in automobile). Otherwise
the electronic parts may be damaged.
- 21 -
Conventions used in this Manual
● This manual is based on the assumption that both the camera and
camera ash’s power switches are powered on.
● Reference page numbers are indicated by “p.**”.
● The following alert symbols are used in this manual:
The Caution symbol gives supplemental information.
The Note symbol indicates a warning to prevent shooting problem.
Pioneering Li-ion Camera Flash
- 22 -
Foreword
For Your Safety
Name of Parts
Body
Control Panel
LCD Panel
What’s in the Box of V850II Kit?
What’s in the Box of V850II (only ash unit)?
Separately Sold Accessories
Battery
Attaching to a Camera
Using the Flash
Power Management
Flash Output
ZOOM: Setting the Flash Coverage
M Mode: Manual Mode
Multi Mode: Stroboscopic Flash
S1 Mode
S2 Mode
Hi-Speed Sync Triggering
Custom Function----Focus Assist Beam
Buzz Function
Wireless Flash Shooting: Radio (2.4G) Transmission
Wireless Control Function
Sync Triggering
Custom Function----Sleep Function
C.Fn Setting Custom Functions
Protection Function
Advanced Application
Technical Data
Maintenance
19
20
23
25
26
27
34
35
37
37
Contents
- 23 -
Name of Parts
● Body
01. Catchlight Panel
02. Built-In Wide Panel
(Retracted)
03. Flash Head
04. Optic Control Sensor
05. Focus Assist Beam
● Control Panel
12. <
>Mode Selection Button/
Wireless Mode Selection
(Long Keypress)
13. < >Zoom / Function Custom
Button (Long Keypress)
14. <
>Group/ Channel Setting
(Long Keypress)
15. <
>Select Dial
06. Wireless Control Port
07. Sync Cord Jack
08. Hotshoe
09. Lock Ring
10. Battery Compartment
11. USB Port
12
13
19
14
15
16
17
18
Fn
16. < > Set Button
17. ON/OFF Power Switch
18. <
>Test Button / Flash
Ready Indicator
19. <
>Focus Assist Beam /
High Speed Sync Button
(Long Keypress)
06
11
07
08
09
10
05
04
03
02
01
- 24 -
Name of Parts
● LCD Panel
20. <M>Manual Flash Mode
21. <S1>S1 Slave Flash Triggering
22. <S2>S2 Slave Flash Triggering
23. <Multi>Multi/Stroboscopic
Flash Mode
24. <
>High Speed Sync
Triggering
25. <
> Battery Level Indication
26. <
> Sound Beep Indication
27. <
>Sleep Status
● What's in the Box of V850II Kit?
1. Flash Unit 2. Li-ion Battery Pack 3. Battery Charger
4. Battery Charger Cable 5. Mini Stand 6. Protection Case
7. Instruction Manual
● What's in the Box of V850II (only ash unit)?
1. Flash Unit 5. Mini Stand 6. Protection Case
7. Instruction Manual
28. <
>Overtemperature
Indication
29. <
>Wireless Signal
Transmission
30. <
>Focus Assist Beam
Indicator
31. Channel
32. Group
33. Zoom focal length
23
24 22 252629
32
31
33
2728 3020
21
- 25 -
● Separately Sold Accessories
The product can be used in combination with the following
accessories sold separately, so as to achieve best photography
effects: X1 TTL wireless ash trigger, Cells II high speed
trigger, FT-16S power & trigger control, Car charger, Mini
softbox, White & Silver Reector, Honeycomb, Color gels,
Snoot, etc.
● Features
1. This ash unit uses Li-ion polymer battery which has long
runtime. The available charge-and-discharge times are 500.
2. It is reliably safe. The inner circuit is against overcharge,
overdischarge, overcurrent, and short circuit.
3. Take only 2.5 hours to fully charge the battery by using the
standard battery charger.
● Cautions
1. Do not short circuit.
2. Do not expose to rain or immerse into water. This battery is not
water proof.
3. Keep out of reach of children.
4. No over 24 hours’ continuous charging.
5. Store in dry, cool, ventilated places.
6. Do not put aside or into re.
7. Dead batteries should be disposed according to local
regulations.
8. If the battery had ceased using for over 3 months, please make
a full recharge.
1
2
5
6
3
4
Battery
- 26 -
● Loading and Unloading the Battery
To load the battery, push the
battery compartment cover
downward and open it.
According to the triangle sign on
the battery pack, insert it into the
compartment until a white knob
locks the battery with a click
sound.
To unload the battery, tap the
white knob and the battery pack
will pop out. Then close the
compartment.
● Battery Level Indication
Make sure the battery pack is securely loaded in the ash. Check
the battery level indication on the LCD panel to see the remaining
battery level.
Battery Level
Indication
Meaning
3 grids Full
2 grids Middle
1 grid Low
Blank grid Lower battery, please recharge it.
Blinking
The battery level is going to be used out
immediately. And the ash will auto power off
in 1 minute. Note: Please recharge the battery
as soon as possible (within 10 days).
Then, the battery can be used or be placed for
long period.
Attach the Camera Flash.
● Slip the camera ash’s mounting
foot into the camera’s hotshoe all
the way.
Secure the Camera Flash.
● Rotate the locking screw on the
mounting foot until it locks up.
Detach the Camera Flash.
● Rotate the locking screw on the
mounting foot until it is loosened.
1
2
3
Attaching to a Camera
1
2
3
- 28 -
Press Set Button <
> to select the
item to be set. The item blinks.
Rotate Select Dial <
> to set a
desired number.
Calculating the Shutter Speed
During stroboscopic ash, the shutter remains open until the ring
stops. Use the provided formula to calculate the shutter speed
required to capture the full sequence of ashes:
Number of ashes / Firing frequency = Shutter speed
For example, if the number of ashes is 10 and the ring frequency is
5 Hz, the shutter speed should be at least 2 sec.
Note:
● Stroboscopic ash is most effective with a highly reective
subject against a dark background.
● Using a tripod and a remote switch is recommended.
● A ash output of 1/1 or 1/2 cannot be set for stroboscopic
ash.
● Stroboscopic ash can be used with “buLb”.
Maximum Stroboscopic Flashes
1 2 3 4 5 6-7 8-9
1/4 7 6 5 4 4 3 3
1/8 14 14 12 10 8 6 5
1/16 30 30 30 20 20 20 10
1/32 60 60 60 50 50 40 30
1/64 90 90 90 80 80 70 60
1/128 100 100 100 100 100 90 80
Maximum Stroboscopic Flashes
10 11 12-14 15-19 20-50 60-199
1/4 2 2 2 2 2 2
1/8 4 4 4 4 4 4
1/16 8 8 8 8 8 8
1/32 20 20 20 18 16 12
1/64 50 40 40 35 30 20
1/128 70 70 60 50 40 40
To avoid overheating and deteriorating the ash head during
stroboscopic ash, do not use stroboscopic ash more than
10 times in succession.
2
3
Flash
output
Flash
output
Hz
Hz
- 30 -
*Hi-speed sync triggering mode is not available when V850II is
mounted onto the camera.
9. Custom Function--Focus Assist Lamp
● Under poorly-lit or low-contrast
conditions, you can press < >
button to turn on the focus
assist beam in order to make it
easier to autofocus.
● The beam will automatically put
out certain seconds after the last
pop is red. The time between the
last re and the auto shutdown of
focus assist beam is called
No-Flash Time. The time is user
adjustable and set to 10 seconds
by default.
● Press < > button and hold for 2
seconds to enter Custom Function.
Then press “SET” button to enter
“FC” mode. The LCD panel
displays “FC” (Auto shutdown of
focus assist lamp) and “No-Flash
Time”. Rotate Select Dial < > to
set a desired time for the ash.
Press < > button to return.
No-Flash Time Meaning
10 seconds
10 seconds after the last re, focus assist
lamp will automatically get out.
20 seconds
20 seconds after the last re, focus assist
lamp will automatically get out.
30 seconds
30 seconds after the last re, focus assist
lamp will automatically get out.
10. Buzz Function
● To turn the buzz function on or off,
press <
> button and hold for 2
seconds to enter Custom Function.
● Then press “SET” button
to enter “bp” mode. The LCD
displays“ON”means buzz is turned
on while “OF” means buzz is
turned off.
● When the buzzer is turned on,
<
>is shown on the LCD display.
Godox Cells II transceiver
(Optional
TTL wireless ash trigger
X1C /X1N (Optional
To avoid overheating or deteriorating the ash head during
high speed sync ash, the over-temperature protection function
will be activated automatically after 10 continuous high-speed
ashes and the ecycle time becomes 10 seconds longer.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Godox V850II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Godox V850II in the language / languages: English as an attachment in your email.

The manual is 3,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info