683875
7
Zoom out
Zoom in
Previous page
1/14
Next page
With high-speed sync, the faster the shutter speed, the
shorter the effective flash range.
Multi flash mode cannot be set in high-speed sync mode.
Over-temperature protection may be activated after 15
consecutive high-speed sync flashes.
Try to avoid using high-speed sync flash, which will cut
short flash tube’s lifetime.
The flash output is adjustable from 1/1 full power to 1/128th power
in 1/3rd stop increments. To obtain a correct flash exposure, use a
hand-held flash meter to determine the required flash output.
Flash Mode – M: Manual Flash
Press < MODE > button so
1 that < M > is displayed.
Turn the Select Dial to choose
2 a desired flash output amount.
In high-speed sync mode,
the adjustable flash range is
1/16~1/1.
Figures displayed when reducing flash output level
Figures displayed when increasing flash output level
1/41/21/1
1/1-0.3
1/2+0.7
1/1-0.7
1/2+0.3
1/2-0.3
1/4+0.7
1/2-0.7
1/4+0.3
······
······
Flash Output Range
The following table makes it easier to see how the stop changes in
terms of f/stop when you increase or decrease the flash output. For
example, when you decrease the flash output to 1/2, 1/2-0.3, or 1/2-
0.7, and then increase the flash output to more than 1/2, 1/2+0.3,
1/2+0.7, and 1/1 will be displayed.
Optical S1 Secondary Unit Setting
In M manual flash mode, press the <SLAVE> button so that this
flash can function as an optic S1 secondary flash with optic sensor.
With this function, the flash will fire synchronously when the main
flash fires, the same effect as that by the use of radio triggers. This
helps create multiple lighting effects.
Optical S2 Secondary Unit Setting
Press the <SLAVE> button so that this flash can also function as an
optic S2 secondary flash with optic sensor in M manual flash mode.
This is useful when cameras have pre-flash function. With this
function, the flash will ignore a single “preflash” from the main flash
and will only fire in response to the second, actual flash from the
main unit.
S1 and S2 optic triggering and off camera high-speed
mode are only available in M manual flash mode.
In the M mode, high-speed sync and rear curtain sync functions
can be achieved.
- 37 -
- 38 -
Shutter Sync Settings:
1. High-speed sync: press the <SYNC> button and is isplayed
on the LCD panel. Set the shutter sync speed to 1/320s (auto
FP) or 1/250s (auto FP) in Nikon camera setting. Turn the
camera dial, and the shutter speed can be set to or more than
1/250s. Check the shutter speed through the camera viewfinder
to confirm whether the FP high-speed function is used. If the
shutter speed is or over 1/250s, it means the high-speed is
booted up.
2. Second-curtain sync: press the < > on Nikon camera, and
turn the main command dial until is displayed on the panel.
Then, set the camera shutter.
MODE ZOOM SYNC SLAVE
MODE ZOOM SYNC SLAVE
SET
REAR
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Godox V350N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Godox V350N in the language / languages: English as an attachment in your email.

The manual is 11,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info