Manual Godox Speedlite V860II Canon (page 7 of 23) (English)

708926

Zoom out

Zoom in

1/23

Flash Mode—E-TTL Autoflash

This flash has three flash modes: E-TTL, Manual (M), and Multi

(Stroboscopic). In E-TTL mode, the camera and the flash will work

together to calculate the correct exposure for the subject and the

background. In this mode, multiple TTL functions are available:

FEC, FEB, FEL, HSS, second curtain sync, modeling flash, control

with the camera’s menu screen.

* Press < MODE > Mode Selection Button and three flash modes

will display on the LCD panel one by one with each pressing.

ETTL Mode

Press < MODE > Mode Selection Button to enter E-TTL mode. The

LCD panel will display.

● Press the camera release button halfway to focus. The aperture

and effective flash range will be displayed in the viewfinder.

● When the shutter button is fully pressed, the flash will fire a pre-

flash that the camera will use to calculate exposure and flash

output the instant before the photo is taken.

　　 FEC: Flash Exposure Compensation

With FEC function, this flash can adjust from -3 to +3 in 1/3rd stops.

It is useful in situations where minor adjusting of the TTL system is

needed based on the environment.

Setting FEC:

Set the flash exposure

2 compensation amount.

● Turn the Select Dial to set

the amount.

● “0.3”means 1/3 step,

“0.7”means 2/3 step.

● To cancel the flash

exposure compensation,

set the amount to “+0”.

Press < SET > button again

3 to confirm the setting.

Press Function Button 2

1 < >. The icon < >

and flash exposure

compensation amount will be

highlighted on the LCD

panel.

C.Fn

Disabling Auto Power Off function is recommended

when the flash is used off camera. (C.Fn-APO, Page 77)

Slave Auto Power Off Timer is set to 60 minutes by

default. Another option “30 minutes” is available. (C.Fn-

Sv APOT, Page 77)

　　 FEB: Flash Exposure Bracketing

You can take three flash shots while automatically changing the

flash output for each shot from -3 to +3 in 1/3rd stops. The camera

will record three images with different exposures: one exposed

according to camera calculations, one over-exposed and another

under-exposed. Over and under exposure amount is user

adjustable. This function helps get correct exposure especially in

shooting moving objects or when environmental lights are complex.

Press function button 3

1 < >. The icon < >

and the exposure bracketing

amount will be highlighted on

the LCD panel.

Press < SET > button again

3 to confirm the setting. Then

your FEC and FEB settings

are displayed on the LCD

panel.

● FEB will be cancelled after three photos are taken.

● For best results, set the camera drive mode to “single” and

ensure the flash is ready before shooting.

● FEB can be used with FEC and FEL.

You can prevent the FEB from being cancelled

automatically after three photos are taken. (C.Fn-

FEB ACL , Page 77)

The FEB shooting sequence can be changed. (C.Fn-

FEB, Page 77)

C.Fn

FEB

Set the flash exposure

2 compensation amount.

● Turn the Select Dial to set

the amount.

● “0.3”means 1/3 step,

“0.7”means 2/3 step.

C.Fn

FEL: Flash Exposure Lock

FEL can lock the correct flash exposure setting for any part of the

scene.

With <ETTL> displayed on the LCD panel, press the camera’s

<FEL> button. If the camera does not have the <FEL> button, press

the < * > button.

Focus the subject.

Press the <FEL> button.

● Aim the subject at the center of

the viewfinder and press <FEL>

button.

● The camera flash will fire a

preflash and the required flash

output for the subject is retained

in memory.

● Each time the <FEL> button is

pressed, a preflash will be fired

and a new flash exposure

setting will be locked.

- 51 - - 52 -

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Godox Speedlite V860II Canon in the language / languages: English as an attachment in your email.

The manual is 16,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Godox Speedlite V860II Canon Manual

Product: