708925
10
Zoom out
Zoom in
Previous page
1/17
Next page
Positioning and Operation Range (Example of wireless flash
shooting)
Autoflash Shooting with One Slave Unit
● Use the supplied mini stand to position the slave unit.
● Before shooting, perform a test flash and test shooting.
● The transmission distance might be shorter depending on
the conditions such as positioning of slave units, the
surrounding environment and whether conditions.
Transmission distance is about 100m.
Auto Shooting with Two Slave Groups
Auto Shooting with Three Slave Groups
You can divide the slave units into two or three groups and perform
E-TTL II autoflash while changing the flash ratio (factor). In addition,
you can set and shoot with a different flash mode for each firing
group, for up to 4 groups.
Wireless Multiple Flash Shooting
A
C
D
Ceiling
Manualflash
B
E-TTL II
* The flash mode settings are indicated only as an example
Shooting with a Different Flash Mode set for Each Group
Manualflash
Manualflash
A
B
A
B
C
Slave Unit Setting
Master Unit Setting
Press < > button so that < >
is displayed on the LCD panel.
Press < > button so that < >
or < > are displayed on
the LCD panel.
2. Master Unit’s Flash OFF
When the master unit is set to OFF, only the slave units will fire a
flash.
Press <MENU> Button to
1 enter C.Fn MASTER
setting.
Set MASTER to ON/OFF to
2 control the On/Off of the
master unit.
< >:The master unit flash
firing is ON.
< >The master unit flash
firing is OFF.
Even if the master unit
flash firing is disabled, it
still fires a preflash to
transmit wireless signals.
1. Wireless Settings
You can switch between normal flash and wireless flash. For normal
flash shooting, be sure to set the wireless setting to OFF.
C.Fn Ver 0.5
CLEAR
LCD
FEB ACL
MASTER
STBY
ON
OFF
LIGHT
- 47 -
- 48 -
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Godox Speedlite V1 Canon at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Godox Speedlite V1 Canon in the language / languages: English as an attachment in your email.

The manual is 10,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info