Manual Godox Speedlite TT350 Canon (page 6 of 13) (English)

708921

Zoom out

Zoom in

1/13

- 22 -

　　 FEC: Flash Exposure Compensation

With FEC function, this flash can adjust from -3 to +3 in 1/3rd stops.

It is useful in situations where minor adjusting of the TTL system is

needed based on the environment.

Setting FEC:

Turn the Select Dial to set the

2 amount.

● “0.3”means 1/3 step,

“0.7”means 2/3 step.

● To cancel the flash

exposure compensation,

set the amount to “+0”.

Press < SET > button again

3 to confirm the setting.

Press the SET Button and

1 the flash exposure

compensation amount will be

highlighted on the LCD panel.

● With high-speed sync, the faster the shutter speed, the

shorter the effective flash range.

● Multi flash mode cannot be set in high-speed sync mode.

● Over-temperature protection may be activated after 15

consecutive high-speed sync flashes.

● Try to avoid using high-speed sync flash, which will cut

short flash tube’s lifetime.

High-Speed Sync

High Speed Sync (FP flash) enables the flash to synchronize with all

camera shutter speeds. This is convenient when you want to use

aperture priority for fill-flash portraits.

Choose the < > button:

Press the <SYNC> button to turn on high-speed sync function.

Second-Curtain Sync

With a slow shutter speed, you can create a light train following the

subject. The flash fires right before the shutter closes.

The flash output is adjustable from 1/1 full power to 1/128th power

in 1/3rd stop increments. To obtain a correct flash exposure, use a

hand-held flash meter to determine the required flash output.

M: Manual Flash

Press < MODE > button so

1 that < M > is displayed.

Turn the Select Dial to choose

2 a desired flash output amount.

In high-speed sync mode,

the adjustable flash range is

1/16~1/1.

Figures displayed when reducing flash output level

Figures displayed when increasing flash output level

1/41/21/1

1/1-0.3

1/2+0.7

1/1-0.7

1/2+0.3

1/2-0.3

1/4+0.7

1/2-0.7

1/4+0.3

······

Flash Output Range

The following table makes it easier to see how the stop changes in

terms of f/stop when you increase or decrease the flash output. For

example, when you decrease the flash output to 1/2, 1/2-0.3, or 1/2-

0.7, and then increase the flash output to more than 1/2, 1/2+0.3,

1/2+0.7, and 1/1 will be displayed.

Optical S1 Secondary Unit Setting

In M manual flash mode, press the <SLAVE> button so that this

flash can function as an optic S1 secondary flash with optic sensor.

With this function, the flash will fire synchronously when the main

flash fires, the same effect as that by the use of radio triggers. This

helps create multiple lighting effects.

Optical S2 Secondary Unit Setting

Press the <SLAVE> button so that this flash can also function as an

optic S2 secondary flash with optic sensor in M manual flash mode.

This is useful when cameras have pre-flash function. With this

function, the flash will ignore a single “preflash” from the main flash

and will only fire in response to the second, actual flash from the

main unit.

● S1 and S2 optic triggering and off camera high-speed

mode are only available in M manual flash mode.

In the M mode, high-speed sync and second curtain sync functions

can be achieved.

- 33 -

- 34 -

ZOOM SYNC SLAVE

SET

MODE ZOOM SYNC SLAVE

SET

MODE ZOOM SYNC SLAVE

SET

MODE ZOOM SYNC SLAVE

SET

MODE ZOOM SYNC SLAVE

SET

● Press the <SYNC> button then the < > icon displayed on the

panel. The flash will without second-curtain sync function in the

Multi mode and in the wireless mode.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Godox Speedlite TT350 Canon in the language / languages: English as an attachment in your email.

The manual is 2,34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Godox Speedlite TT350 Canon Manual

Product: