656002
6
Zoom out
Zoom in
Previous page
1/13
Next page
- 33 - - 34 -
AD600B can only be set as slave unit (receiver end). Press Wireless Selection Button to switch the two wireless
modes: radio transmission and optical transmission. When using radio transmission, AD600B will automatically
switch between Canon (C) and Nikon (N) system according to X1 series transmitter. When using optical
transmission, please set AD600B to Canon (C) or Nikon (N) before firing a flash.
Wireless Mode
OFF
Radio Transmission
Optical Transmission
Flash Mode
M / Multi
TTL / M / Multi
TTL / M / Multi
Wireless Flash Mode
Battery
Features
1. This flash unit uses Li-ion polymer battery which has long runtime. The available charge-and-discharge times are
500.
2. It is reliably safe. The inner circuit is against overcharge, overdischarge, overcurrent, and short circuit.
3. Take only 4 hours to fully charge the battery by using the standard battery charger.
Cautions
Do not short circuit.
Do not expose to rain or immerse into water. This battery is not water proof.
Keep out of reach of children.
No over 24 hours' continuous charging.
Store in dry, cool, ventilated places.
Do not put aside or into fire.
Dead batteries should be disposed according to local regulations.
If the battery had ceased using for over 3 months, please make a full recharge.
Loading and Unloading the Battery Pack
Push down the battery pack
2 until it is locked.
Match the battery's groove with
1 the main battery compartment's
ridge.
Push the battery pack upward
2 to unload it.
Push the Battery Locking Ring
1 to the right.
Loading:
Unloading:
Battery
Power Management
Long press the <ON/OFF> Power Switch for 2 seconds to control the on/off of the flash unit. Turn off the power
pack if the flash unit will not be used for an extended period (approx. 1 hour).
Disabling Auto Power Off function is recommended when the flash is used off camera. (C.Fn-APO, Page 44)
C.Fn
Battery Level Indication
Attach the battery pack to the flash correctly. Be aware of the battery level by check the battery level indication on
the LCD panel when using.
Note: The two indications are almost the same except of grids shift.
3 grids
2 grids
1 grid
Blank grid
Blinking
1 red grid +3 green grids
1 red grid +2 green grids
1 red grid +1 green grid
1 red grid
Full battery
Medium battery
Low battery
Lower battery, please recharge it.
Battery Level Indication
on the LCD Panel
(Indicating battery level and
management of the whole flash
system)
LED Battery Level Indication on
the Battery
(Indicating battery level and
management of non-loaded battery)
The battery level is going to be used out immediately.
And the flash will auto power off in 1 minute.
Note: Please recharge the battery as soon as possible
(within 10 days). Then, the battery can be used or be
placed for long period.
Meaning
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Godox AD600B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Godox AD600B in the language / languages: English as an attachment in your email.

The manual is 7,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info