568522
24
Zoom out
Zoom in
Previous page
1/52
Next page
24
Troubleshooting
Look through the following table about the possible troubles and you may find answers before
request service. It may help you to resolve the problems with some easy operations according
to this table. If something goes wrong with the receiver and can’t back to normal, please cut off
the power for few minutes and restart the product. If the problem remains and proves to
beyond your capability, you had better hand it over to a qualified service agent.
The integrated circuits are easily breakdown by static. Make sure the antistatic protection has
been well taken before maintenance.
Troubles
Possible Cause
Suggested Solutions
No power
The power cord has not been well
connected
Plug the power cord into the outlet
tightly and turn on the power; if still
no power, turn off the power again,
and wait for 5-10 minutes, then
restart again.
Can’t scan
programs
The antenna is not adjusted well
Adjust the antenna or use an
outdoor antenna
Antenna incorrectly
Use an antenna with 75 Ω
impedance input
Parameter input incorrectly
Input Frequency, Bandwidth
parameter correctly
No picture
Output cord is connected incorrectly
Connect the output cord correctly. If
the problem is still exit, the output
cord may damage.
The video output mode of the unit is
different from the mode of monitor
Reset the mode
No Color
The video output system of the unit is
different from the mode of monitor
Reset the color system
Image
distortion at
channel shift
normal
The remote
control fails
to work
Batteries incorrectly installed
Install the battery correctly
Batteries exhausted
Replace the battery
Beyond the effective operation range
Operate within an effective range
The remote sensor is pointed to by bright
light.
Place the unit elsewhere for a
change
Audio track
and subtitle
language
are not the
chosen
items
Has not chosen the right sound track
Press the Audio button to shift the
track
No sound
The unit is in a mute status
Cancel the mute
Volume is too low
Augment the volume
Cable is connected incorrectly
Connect the cable correctly
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Goclever DVB-T 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Goclever DVB-T 100 in the language / languages: English, Polish as an attachment in your email.

The manual is 1,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info