811662
19
Zoom out
Zoom in
Previous page
1/23
Next page
3534
GO SWISSDRIVE
Bluetooth (1): The Evo control unit has an integrated Bluetooth chip and can be con-
nected via Bluetooth 4.0 with various compatible devices, such as for ex. mobile pho-
nes. When a new Bluetooth connection was set up, you are informed with a pop-up.
Whether your mobile phone supports the Bluetooth 4.0 standard can be gathered
from the operating manual of your mobile phone. Details on how to connect a mobile
phone are given in the chapter “Congurations and settings”.
Incoming calls (2): If your Evo control unit is connected via Bluetooth with a mobile
phone, calls coming in on this mobile phone are visualised with a pop-up on the Evo
display. If the number of the caller is stored in the phone book of the connected mobi-
le phone, the contact data recorded together with the number (name, rst name) are
shown in the pop-up. If the number is not stored in the phone book, only the phone
number is displayed.
Incoming SMS (2): If the Evo control unit is connected via Bluetooth with a mobile
phone, SMS coming in on this mobile phone are visualised with a pop-up on the Evo
display. If the number of the sender is stored in the phone book of the connected
mobile phone, the contact data recorded together with the number (name, rst name)
are shown in the pop-up. If the number is not stored in the phone book, only the pho-
ne number is displayed.
Battery state of charge (3): In case the battery state of charge of your GO SwissDrive
system drops below 20%, you are informed about this fact with a pop-up. A further
indication is shown in form of a pop-up, when the battery state of charge drops below
10%.
Storage of data (4): The Evo control unit offers you the option to save your current
tour data and your total data via the USB interface or the Bluetooth interface on an
external device. The successful storage of the data on the external device is conr-
med by the display of a pop-up.
In case a greater volume of data is saved, individual pop-ups visualise the beginning
and the successful end of the saving process. If an error occurs during the saving
process, another pop-up opens with the respective information.
No external device connected (5): If you try to save data via the USB interface or
the Bluetooth interface and there is no external device connected with these inter-
faces, a respective indication is shown in form of a pop-up.
Early warnings (6): To avoid a possible overload of your GO SwissDrive system the
Evo control unit can indicate early warnings. This includes in particular the warning
concerning overheating of the motor and the battery. Before the motor or the battery
overheat and correspondingly begin to reduce their performance for system protec-
tion reasons, you will be informed on the display.
I Adapt your riding style and/or the assistance level according to these
warnings to avoid a temporary reduction or even a complete loss of
the drive assistance. This is achieved by either reducing the assis-
tance level or by shifting into a lower gear with lower gear ratio in
order to reduce the temporary overload of the drive components.
1
4
5 62
3
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for GO Swissdrive Evo control unit at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of GO Swissdrive Evo control unit in the language / languages: English as an attachment in your email.

The manual is 1.44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info