Manual Gloria Thermoflamm bio Electro (page 20 of 140) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

725124

Zoom out

Zoom in

1/140

Use an extension cable to connect the device to a power outlet (230 V AC) (see Figure 4).

Turn on the device by pressing the „ON/OFF button“ Din the „handle“ A.

Full operating temperature will be reached after approx. 1 minute (see Figure 5).

CAUTION

!Risk of burns caused by hot air!

Never direct the hot air stream at humans or animals.

!Risk of burns caused by hot parts!! Do not touch „conical jet“ Jor „heat shield“ I.

!During breaks in work, release the „ON/OFF button“ Dand place the device with the

„support stand“ Fopened on a level fireproof surface (see Figure 8).

To eradicate weeds, direct the „conical nozzle“ Jat the plant to be treated for 5-10 sec-

onds according to the type of plant (see Figure 5).

In the case of tall plants, first only briefly heat the the upper section of the plant and then

direct the „conical nozzle“ Jat the shrunken plant for approx. 5-10 sec. (see Figure 6).

6.2 User information

!A faint odour may be released in the course of first-time operation. This is not harmful to

the device.

!The device is particularly suitable for the removal of weeds.

!The device is most effective if the plant has a high sap content. The best time for treating

wild growth is in the spring. The effect is more intense, the younger the growth is. Howev-

er, the results are not immediately visible. Visible parts of the plant can also be burned as

part of a longer exposure time.

The sensitivity of the plants to the heat radiation is not immediately evident during the

recommended exposure time. In principle, the following applies: soft-leaved seedlings are

the most sensitive, in other words, they will not survive a single treatment.

!Older plants with hard leaves, such as thistles, will dry out after several treatment at inter-

vals of one to two weeks. Sclerophyllous grasses are extremely robust and require a longer

time for the heat to take effect.

!In the initial phase, wild growth growing on/through surfaces should be treated briefly sev-

eral times. Only then are lasting results guaranteed.

After this, treatments at longer intervals will be sufficient.

!Weeds need only be heated. It is not necessary to burn them. This dries out the Cells of the

leaves and the weed dies back.

!Certain weed species require repeated treatment.

!The device is also suitable for rekindling glowing embers in a charcoal grill in the open

air. Hold the conical nozzle of the switched-on device close to the charcoal. As soon as

the charcoal embers begin to glow, the hot air flow will rekindle the flame. Then hold

the device further away from the charcoal.

CAUTION! Fire hazard caused by flying sparks!

!Hold the device at a distance from the charcoal to avoid sparks.

RZ_thermoflamm_electro_LG1_977841.qxd:Text_GB 11.03.2014 13:52 Uhr Seite 20

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gloria Thermoflamm bio Electro in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gloria Thermoflamm bio Electro Manual

Product: