725139
29
Zoom out
Zoom in
Previous page
1/99
Next page
30
Indicator statuses:
The charging process is indicated
by the flashing of the battery charge indi-
cator.
A solid light on the battery charge
indicator signals that the battery is fully
charged or that the temperature of the
battery is not within the permitted charg-
ing temperature range, and can therefore
not be charged. The battery is charged as
soon as the allowable charging tempera-
ture range is reached. When the battery is
not inserted, a solid light on the battery
charge indicator signals that the mains
plug is inserted in the plug socket and
that the charger is ready for operation.
Following a successful charging proce-
dure, first remove the battery from the
charger. Then disconnect the charger
plug from the power outlet.
7 Commissioning
ATTENTION!
DEVICE PROTECTION!
BEFORE COMMISIONING OBSERVE
CHAPTER 2 “FOR YOUR SAFETY”.
Clean the roller/joint brush (N/J)
before each cleaning operation.
The air inlet openings on the
motor/gear unit (L) must not be
blocked or covered.
Check on a small, if possible hidden
area, that the ground to be cleaned
will not be damaged by the brushing
action.
Never use the device too long on
one spot, always guide at walking
pace.
7.1 Operation
Figures 8 - 11
Insert the charged battery into the bat-
tery adapter as shown until this engages
with a noticeable 'click'.
Always place the device parallel on the
ground which is to be cleaned. Identify
the most comfortable but also most
effective working angle for yourself
and then adjust the 5 click-stop safety
guard (O) so that the rubber lip is just
above the ground.
Make sure that the surface to be
cleaned is free from debris e.g. stones,
screws etc., which could be flung up.
CAUTION
RISK OF INJURY FROM ROTATING
BRUSHING TOOL!
Never start the device in a tilted posi-
tion!
Do not start or operate device if
bystanders are in the danger zone.
Never put your hands or feet near to
the rotating brushing equipment!
Never clean if others, in particular
children or animals, are in the area!
Never use the device in the rain.
You can regulate the speed of the
brush by pressing the speed control on
the adjustment wheel (S).
Hold the device securely by the handle
(A) and additional handle (E) and
switch on the device by pressing and
holding the ON/OFF safety switch (D)
in handle (A).
In case of work interruptions or
danger, release the ON/OFF safety
switch (D) immediately.
7.1.1 Battery status indicator
The device is equipped with a battery
charge indicator (J) that displays the
charging status of the battery. The dis-
plays only light up when the device is
switched on.
max. 45 °C
8
9
10
11
7b
Speed recommendations for
GLORIA brushes
Position 1-2 soft brushes (wood brush)
Position 3-4 harder brushes (stone brush)
Position 5-6 joint brush (wire brush)
GB
RZ_MULTIBRUSH_Li-on__DE/GB/FR/NL/IT/DK_979162.qxp_Text_GB 04.03.20 17:01 Seite 30
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gloria Multibrush li-on at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gloria Multibrush li-on in the language / languages: English, German, Dutch, Danish, French, Italian as an attachment in your email.

The manual is 2,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info