725199
22
Zoom out
Zoom in
Previous page
1/134
Next page
22
Fitting the spraying lance
Fig.
l Screw spray tube and spraying
lance to the quick closure valve. Im-
plement a quick pressure test with
water.
Fitting the spray tube
Fig.
l Lay tank on its side and screw the
spray tube onto the tank.
5/10 litre units
Check safety valve
Fig. /
l Check the safety valve each time be-
fore you use the unit! Insert the pump
and screw it in. Operate the pump
until the pressure gauge shows no
further increase in pressure (the
safety valve blows off the excess
pressure).
l Caution! Fig.
Some types of unit are equipped
with a connection for an air com-
pressor.
The following must be observed in
such a case.
- Compressor boost pressure or
compressed air supply
secu-
red onto max. 6 bar.
- Ensure the pump is in the locked
position before pressurizing.
-
Do not exceed the maximum filling
level.
- The non-return valve in the com-
pressor connection must not be re-
moved to depressurize the tank.
Fill tank
Caution! Operate the pressure relief
valve (red button) until the unit is no
longer under pressure.
l Remove the pump by turning it to
the left. To do this, first release the
piston rod, turn it 180°
and transfer
the screw force via the back of the
locking pins on the pump housing.
Caution! Beforefilling the spraying
unit, observe
any legally-required infor-
mation concerning special dangers (R
clauses /GefStofffV) andsafety advice
1
3
5
7
2
4
6
8
9
10
11
11 a
12
13
15
15 a
16 a 17 a
17
19
14
16
18
20
21
22
23
24
25
27
29
31
26
28
30
32
33
34
35
36
1
3
5
7
2
4
6
8
9
10
11
11 a
12
13
15
15 a
16 a 17 a
17
19
14
16
18
20
21
22
23
24
25
27
29
31
26
28
30
32
33
34
35
36
1
3
5
7
2
4
6
8
9
10
11
11 a
12
13
15
15 a
16 a 17 a
17
19
14
16
18
20
21
22
23
24
25
27
29
31
26
28
30
32
33
34
35
36
2
4
6
8
10
11
11 a
12
13
15
15 a
16 a 17 a
17
19
14
16
18
20
21
22
23
24
25
27
29
31
26
28
30
32
33
34
35
36
1
3
5
7
2
4
6
8
9
10
11
11 a
12
13
15
15 a
16 a 17 a
17
19
14
16
18
20
21
22
23
24
25
27
29
31
26
28
30
32
33
34
35
36
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gloria 410 TI - Profiline at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gloria 410 TI - Profiline in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info