636444

Globo OPTICUM HD T90 Manual

12
Zoom out
Zoom in
Previous page
1/19
Next page
22 23
Menu
Delete All
Use this function to delete all stored channels. Select Delete All with / and
press OK. A conrmation banner will pop up. Select Yes to save the changes
or No to discard.
The Delete All function will permanently delete all current channels from
your receiver, and you are not able to leave the menu until you search for
channels again.
4.3 Installation
Auto Scan
Select Auto Scan with / and press OK to enter. A conrmation banner
will pop up. Select Yes to start scan or No to discard. The Auto Scan may
take several minutes. The receiver will store all newly found channels in the
channel list.
Select Channel Scan with / and press OK to enter.
Scan Mode — Use / to toggle between available scan modes: By Channel
and By Frequency.
If By Channel is selected, use the cursor buttons to set Scan Band and
Ch No. (Channel Number).
If By Frequency is selected, use the cursor buttons to set Frequency and
Bandwidth.
Tuner Power (+5V) — Set to On if you use an active antenna. When set to
On, 5 V will be present on the Aerial In connector of the receiver. Select O
for passive antenna.
Highlight Search and press OK to start scanning.
Channel Scan
Scan Settings
Select Scan Settings with / and press OK to enter.
LCN If LCN (Logical Channel Numbering) is activated and
an LCN signal is provided by the operator, chan-
nels will be stored in an operator dened order.
Transmitter list
Use this function to test the signal and to adjust your antenna. Select
Transmitter list with / and press OK to enter. The receiver will display the
list of territorial units of your country. Use / to select your location and
press OK to enter. On the next screen there is displayed a list of transmitters
in your territorial unit. Use / to select a transmitter of your choice and
press OK to enter. Select Multiplex of your choice with / and press OK to
enter. On the next screen you can see the signal intensity and signal quality
bars and you can adjust your antenna to the best results. Press OK to start
scanning channels.
Use / to select Installation and press OK or to enter. Use / to high-
light the desired submenu and press OK to select. Press EXIT or MENU to get
back to the main menu.
Set LCN to On to activate operator dened channel
numbering or O to store channels in found order.
Allow mux repeating Use / to toggle between On or O. Set Allow Mux
(Multiplex) repeating to ON if you want the receiver
to scan for channels from the same multiplex on dif-
ferent frequencies. This allows the receiver to search
for channels with the best signal.
Tuner Power (+5V) Use / to toggle between On or O. Set to On if
you use an active antenna. When set to On, 5 V will
be present on the Aerial In connector of the receiver.
Select O for passive antenna.
FTA only Use / to toggle between FTA Only On or O.
When FTA Only is set to On, scrambled channels
won’t be stored in the Channel List.
Sort priority Use / to toggle between HD Channels,
Higher MUX, Lower MUX or SD Channels. Your
choice indicates which method will be used by the
receiver when creating Channel List.
Once all changes are made, press EXIT. A conrmation banner will pop up.
To save changes you have to scan channels. Select Yes to scan channels or
No to discard.
4.4 System Setup
Use / to select System Setup and press OK or to enter. Use / to high-
light the desired submenu and press OK to select. Press EXIT or MENU to get
back to the main menu.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Globo OPTICUM HD T90 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Globo OPTICUM HD T90 in the language / languages: English as an attachment in your email.

The manual is 4,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info