636441
22
Zoom out
Zoom in
Previous page
1/27
Next page
21
your countrys time zone. The step is half an
hour.
Daylight Time
Set “Daylight Time” option to “ON” means the
summer time is on thus local time is one hour
late than normal.
Wake Up
If you set “Wake Up” option to “Enable”, you
activate a wakeup timer. The service list will be
displayed for you to set first view service using
UP/DOWN button.
Wake Up Time
Only if you set “Wake Up” option to “Enable”,
“Wake Up Time” is active for you to set wakeup
time using UP/DOWN button.
Sleep
If you set “Sleep” option to “Enable”, you
activate a sleeping timer.
Sleep Time
Only if you set “Sleep” option to “Enable”,
“Sleep Time” is active for you to set sleeping
time using UP/DOWN button.
A/V Control
You
can set SCART, screen ratio and TV format,
Video picture parameters in this menu
according to the TV set connected to the
receiver. Please use UP/DOWN button to select
one of the following items and press
LEFT/RIGHT or OK button to set certain value.
Details are as the following:
TV-SCART
Set the video output mode for the TV SCART
(RGB, CVBS).
VCR-SCART
Set the video output mode for the VCR SCART
(CVBS only).
Screen Ratio
Set the screen aspect ratio of the TV set
connected to this receiver (Auto, 16:9 Full, 4:3
Full, 16:9 Letter Box or 4:3 Letter Box).
TV Standard
Set the format of the TV set connected to this
receiver (AUTO, PAL, NTSC, or SECAM). In
AUTO mode, the receiver set the format to the
one same as service viewed before enter this
menu, and automatically follows current
service’s format whenever current service’s
stream format changes.
Video Brightness
Set the video brightness for receiver output. It
ranges from 1 to 8, and is independent of the
TV set connected to the receiver.
Video Contrast
Set the video contrast for receiver output. It
ranges from 1 to 8, and is independent of the
TV set connected to the receiver.
Video Saturation
Set the video saturation for receiver output. It
ranges from 1 to 8, and is independent of the
TV set connected to the receiver.
UHF Setting
You can set UHF parameters in this menu
according to the TV set connected to the
receiver. Please use UP/DOWN button to select
one of the following items and press
LEFT/RIGHT or OK button to set certain value.
Details are as the following:
UHF Channel
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Globo OPTICUM 4100TSCR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Globo OPTICUM 4100TSCR in the language / languages: English as an attachment in your email.

The manual is 6,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Globo OPTICUM 4100TSCR

Globo OPTICUM 4100TSCR User Manual - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info