814032
14
Zoom out
Zoom in
Previous page
1/16
Next page
22.
Alarm warnings:
In the event of a technical failure the circuit board will react and give warning of
the failure by switching on the LED alarm (LED alarm – on) and a warning sound
will be heard. The following alarms can be activated:
Each alarm will ensure that the stove is switched off immediately. WITH
THE EXCEPTANCE OF THE ALARM INDICATING A POWER CUT, the alarm
alert is activated at the end of a certain length of time and can be reset by
continually pressing the P3 button. Every time an alarm is reset the
switching off stage of the oven will restart for safety precautions. During
the alarm alert the alarm LED (Alarm LED on) is always on and the buzzer
(alarm sound) will sound intermittently when activated. If the alarm is not
reset the oven will be switched off and the alarm alert is always shown.
AL 1 – POWER CUT
A power cut can occur while the oven is on. If the cut is less than 20 seconds the
oven will switch back to the users mode. When this is activated and the power
cut is longer than 20 seconds the alarm is activated. 'AL 1 POWER CUT 'will
appear in the display and the oven is switched off.
Al 2 – AIR SENSOR (safety temperature thermostat)
This alarm is activated if the safety temperature thermostat is defect. The oven
switches to the alarm mode and the alarm – LED is activated. (Alarm-LED on).
The display will show “Al 2 air sensor and the oven is switched off.
AL 3 – FLUE GAS TEMPERATURE SENSOR (flue gas overheating)
This alarm is activated when the safety temperature thermostat detects that a
fixed temperature which cannot be changed has been exceeded. 'AL flue gas
temperature sensor 'appears in the display and the oven is switched off.
23.
AL 4 – SMOKE EXTRACTOR FAN
This alarm will be activated when the extractor fan is defect. The alarm will go off
and the signal “AL 4 smoke extractor fan” will appear in the display.
AL 5 – NO FLAME (no ignition):
This alarm will be activated when the ignition fails. This happens when the
temperature of the flue gas does not exceed the programmed temperature after
the set time. “Al 5 no flame “will appear in the display and the oven switches to
the alarm mode.
AL 6 – NO PELLETS
This alarm is activated when the flue gas temperature drops below the minimum
set temperature during the use of the stove .The signal 'AL 6 – no pellets' will
appear in the display and the alarm will be set off.
AL 7 – TEMPERATURE SAFETY
(Safety thermostat for too high a temperature):
This happens when the safely thermostat registers a temperature which is higher
than the limit. The thermostat reacts and switches off the auger. The display
shows the alarm is on (LED –alarm on) by the ´AL 7 temperature safety´ sign
and the oven is switched off.
AL 8 – PRESSURE ERROR (no vacuum / chimney draught)
This occurs when the pressure gauge detects pressure which is higher than the
limited pressure. The pressure gauge reacts and switches the auger off. The
alarm (LED alarm) is indicated by 'AL8 pressure error' in the display and the
oven is switched off.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Globe Fire Pasquale at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Globe Fire Pasquale in the language / languages: English as an attachment in your email.

The manual is 1.78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Globe Fire Pasquale

Globe Fire Pasquale User Manual - German - 17 pages

Globe Fire Pasquale User Manual - Dutch - 16 pages

Globe Fire Pasquale User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info