814088
11
Zoom out
Zoom in
Previous page
1/16
Next page
16.
The correct use of the display: Model Janice
Tested EN 14785, 2nd Fase of the 1st BimschV Germany
Using the display, the stove is simple to operate with a few buttons. The
display and LED indicators give information about the stove level. In the
programme module the various parameters are given which can be changed
using the buttons.
Key P 1 : Increase room temperature Display D 1 :
Key P 2 : Lower room temperature During set up the room
Key P 3 : Prog./ Menu temperature and the time is
Key P 4 : ON/OFF shown. Durin use the set
Key P 5 : Lower power power is given.
Key P 6 : Increase power
LED L 1 : Programme (time switch) on Display D 2 :
LED L 2 : Auger on During set up the status of the
LED L 3 : Remote control connected circuit board is shown.
LED L 4 : Thermostat on During use the set temperature
(Regulating room temperature) is shown.
LED L 5 :Flashes during set up
Menu:
By pressing the button P1 for a short length of time, you will get the menu.
The menu is split up showing more underlying items and parts which will give
access to the settings and programming of the circuit board.
17.
M1 menu – Date and Time
Press P3 until M1 appears in the display. Confirm this with button (P3). Using the
buttons (P1) and (P2) the correct time can be installed. This must be confirmed
using (P3). Next the day can be programmed and confirmed with (P3) adding the
month and confirming with (P3). Finally the year can be programmed pressing
(P3) until the time appears again. (P4) can be pressed to exit M1.
M2 menu – Programme installation (timer):
Sub menu M2-1- Programme activation
Keep P3 pressed until M1 appears, then press P5 until M2 appears in the display
and confirm this with (P3). Open the menu M2-1 and confirm with (P3) and
activate the programme with the arrow (P1) on ON. Then return by pressing (P3)
for a few moments and activate the programme.
Sub-menu M2-2- Daily programme
Two ON/OFF cycles for every day
Sub-menu M2- 3 Weekly programmes
Four ON/OFF cycles, the days can be selected for each hour.
Sub-menu M2-4 Week end programma
Two ON/OFF cycles, for Saturday or Sunday
Programme installation:
Go to the required programme by pressing the (P3) button and confirm
the programme by pressing the P1 button. ON will appear. Press (P3)
for starting time and select this with the buttons P1 and P2. It is only in the
weekend programme that you press programme to select the days, using the
(P3) button in between to choose the days.
You can start or switch off the programme with the buttons P5 and P6. When
selecting the hours and days press the (P3) button until the startup display
appears. When the correct times have been selected (P4) can be pressed to exit.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Globe Fire Janice at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Globe Fire Janice in the language / languages: English as an attachment in your email.

The manual is 1.75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Globe Fire Janice

Globe Fire Janice User Manual - German - 16 pages

Globe Fire Janice User Manual - Dutch - 16 pages

Globe Fire Janice User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info