814084
4
Zoom out
Zoom in
Previous page
1/16
Next page
2.
To keep the possibility of a guarantee our advice is to use a trained
specialist who will follow the current installation regulations when installing
the pellet stove.
This is a paid service for which you will need to make a separate appointment
.Together with our service partner we offer a maintenance contract for your stove.
A monthly payment covers the costs of a yearly maintenance, spare parts and
breakdowns.
This specialised engineer takes care of the initial installation as well as the
cleaning and maintenance of the stove. It is important that suitable fuel is used
and the owner cleans the stove regularly in the correct manner. If installation,
operating and maintenance instructions are not adhered to correctly the guarantee
will be invalid.
When using the stove for the first time please check that the fire grate has
been cleared and the pellet tank is empty and free of any residue.
The fire grate must be cleaned regularly. For maintenance we advise contracting
our service partner. All working parts of the stove will then be cleaned and tested,
preparing the stove for the next heating season.
Do not disconnect the electricity cable while the stove is in use.!!!
Operate the appliance with the help of the buttons on the display. De smoke
extraction fan must always be able to work to ensure the smoke is sucked
out through the chimney after use. If the electric plug is pulled out the fan
will stop working and the smoke will not be sucked out of the chimney.
Correct use, care and maintenance will lengthen the lifespan of the appliance.
Wastage and unnecessary environmental taxation will also be reduced.
Seite 2.
3.
Power supply
230 V AC / 50 Hz
Weight bearing capacity of floor
Make sure the floor has sufficient weight bearing capacity to take the weight of
the stove permanently.
Floor beneath and in front of stove
Floors which have flammable materials, such as carpet, parquet or cork must be
protected by a fire resistant plate which must be 30 cm wider at the sides,
measured from the side door /storage area of your stove and measuring at least
50 cm in front of the stove.
Chimney connection
The appliance must be connected to an approved chimney suitable for solid fuels.
To efficiently vent smoke from a pellet stove, the chimney pipes should have a
larger diameter than the 80 mm smoke pipe that connects the stove to the
chimney channel. It is recommended to use an insulated chimney with an internal
diameter of minimal 100 to maximal 130 mm, depending on the installation
conditions and chimney height. To ensure trouble-free use and optimal airflow, the
ideal chimney size for a pellet stove must be determined by the installer (or
chimney sweeper) through the assessment of several factors such as chimney height,
draught, and flue gas quantity (i.a.). The choice of size depends on this assessment.
Avoid too long a flue pipe to the chimney. The horizontal length of the pipe must be
no longer than 1.5 metres. Avoid having the smoke change direction too many times
leading up to the chimney. A maximum of three bends applies here. If it is not possible
to connect the stove directly to the chimney, a connecting piece with an opening for
cleaning can be used where possible. The connecting pieces must be made of metal
and of an approved standard. Installation must be airtight. There must be a natural
draught ensuring the removal of fumes, in case of a temporary power cut, for example.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Globe Fire Billy Elegance at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Globe Fire Billy Elegance in the language / languages: English as an attachment in your email.

The manual is 1.76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Globe Fire Billy Elegance

Globe Fire Billy Elegance User Manual - German - 16 pages

Globe Fire Billy Elegance User Manual - Dutch - 16 pages

Globe Fire Billy Elegance User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info