z Switch off alarm completely - Press any button on the base station
in order to end the alarm.
z Autostop function - If you do not press any button, the alarm will
switch off automatically after 2 minutes.
z After 24 hours, the alarm will sound again.
Alarm repeat
X Press the LIGHT/SNOOZE button 1x.
The alarm becomes silent for approx. 5 minutes. After this, the devic-
es switches itself back on and wakes you up again. This process can
be repeated several times.
Weather data
Temperature and humidity
This area is divided into two parts in the display. The top section OUT
[OUTSIDE] shows the values measured by the radio sensor, the
bottom section IN [INSIDE ] shows the data recorded by the base
station. For technical reasons, the relative humidity can only be
determined within the temperature range of 0 - 60°C.
If "LL" is shown in the OUT [OUTSIDE] section of the
display, the humidity is either a) outside of the measure-
ment range of 20% or b) the outside temperature has fallen
below 0°C. In case b), "LL" is displayed for technical reasons.