524246

GlobalTronics GT-RD-2R Manual

10
Zoom out
Zoom in
Previous page
1/15
Next page
Helpline No. UK/Northern Ireland 0800 328 6020
Rep. Ireland 00800 4467 5888
E-mail Support info@dariolondon.com
Model Number: GT-RD-2R/GT-RD-1T
18
Helpline No. UK/Northern Ireland 0800 328 6020
Rep. Ireland 00800 4467 5888
E-mail Support info@dariolondon.com
Model Number: GT-RD-2R/GT-RD-1T
19
NOTE:
For permanent installation of the device, skilled
handling of tools is necessary. If necessary, please
contact an electrical engineer, if you have no tools
orarenotexperiencedinhandlingtools!
Installation of the receiver
For installation on plaster or brickwork:
1. Drill 30 mm deep (ø 5 mm) with an impact drill;
2. Insert wall plugs (S5) in the drill hole;
3. Turn in a suitable screw (head diameter not larger
than 7 mm), such that the head protrudes approx.
5 mm.
4. Suspend receiver.
For installation on wood or similar:
1. Drill approx. 0.5 mm (ø 2 mm) deep using a drill.
2. Turn in a suitable screw (head diameter not larger
than 7 mm), such that the head protrudes approx.
5 mm.
Startup and installation
3. Suspend receiver.
Installation of the transmitter
NOTE:
The wall bracket for the transmitter (14) should
be attached to the wall without a gap, because
water could otherwise penetrate the housing and
damage the electronic parts.
Thetransmittershouldalwaysbeinstalledhorizon-
tally. You can label the transmitter with a name.
The name field (3) is covered with a film. The film
can be removed in the area of the LED function
control (4) (press in with fingernail).
For installation on plaster or brickwork:
1. Maketwohorizontalmarksatadistanceof65mm.
2. Drill 30 mm deep (ø 5 mm) with an impact drill;
3. Insert wall plugs (S5) in the drill hole;
Startup and installation
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for GlobalTronics GT-RD-2R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of GlobalTronics GT-RD-2R in the language / languages: English as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info