Manual GlobalTronics GT-EM01 (page 61 of 69) (English, German, Portuguese, Spanish)

523997

Zoom out

Zoom in

1/69

Cleaning and care

Clean all parts of the Ice Cream Maker and all work equipment

thoroughly after preparing ice cream..

Hazard:

• Disconnect the mains plug before cleaning the motor block (1)

• The motor block (1) and the freezer bowl (3) must not be immersed in

water or other liquids.

Careful:

• No part of the Ice Cream Maker may be cleaned in the dishwasher.

• Allow the freezer bowl (3) to warm to room temperature prior to

cleaning.

• Do not use any aggressive chemical detergents, abrasives, hard

sponges, or similar, for cleaning.

1. Press the clips inside the lid (2) together and remove the motor block

(1) from the lid (2).

2. Wipe the motor block (1) with a damp cloth and then dry it off.

3. Wash the lid (2), the connector (5) and the stirring paddle (4)

thoroughly in hot rinsing water. Rinse off again with hot water.

4. When the freezer bowl (3) has reached room temperature, wash it

thoroughly from the inside with hot rinsing water. From the outside,

wipe the bowl with a damp cloth.

5. Dry all parts of thoroughly.

6. Check regularly whether coolant is escaping from the freezer bowl (3).

If this is the case, the Ice Cream Maker must no longer be used.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of GlobalTronics GT-EM01 in the language / languages: English, German, Portuguese, Spanish as an attachment in your email.

The manual is 0,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

GlobalTronics GT-EM01 Manual

Product: