607022
7
Zoom out
Zoom in
Previous page
1/16
Next page
7
Mounting
Attention
Installation and mounting of electrical devices may only be car-
ried out by a qualified electrician.
The PCB can be pushed downward for mounting and for con-
nection of the bus line.
1. Select the installation site. T
he cable duct leading into the
bottom section of the housing is used for line guidance. The
installation height of the outdoor station can be varied via
the line outlet in this way.
2. Mark the mounting holes using the hole template (part of
the pa
ckaging).
3. Drill the holes (6 mm) and insert the accompanying plugs.
4. Guide the stripped bus line with appro
x. 5 mm of insulation
into the bottom section of the housing.
5. Mount the bottom section of the housing to the wall with
the accompan
ying screws.
Push the PCB downward to screw in the upper mounting
sc
rews.
6.
Connect the 2-wire bus to the bus terminals.
The wire jumpers between BUS and ZV are required for opera-
tion of the colour camera. Thus the illumination of
the call but-
tons at the outdoor station can
not be switched off.
If an external supply is connected
to the ZV terminals, the jump-
ers between ZV and BUS must be removed.
i
Movable PCB
i
Jumpers between BUS and ZV
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gira 1270 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gira 1270 in the language / languages: English as an attachment in your email.

The manual is 0,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gira 1270

Gira 1270 User Manual - German - 16 pages

Gira 1270 User Manual - Dutch - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info