607001
2
Zoom out
Zoom in
Previous page
1/6
Next page
GIRA
Info
Radio-control pushbutton
Installation Instructions
Radio-control pushbutton 2/04 Page 2 of 6
Procedure
1. Install the selected insert c in a flush-mounting box
(deep model recommended), the connecting termi-
nals of the insert pointing downwards.
2. Plug the radio-control pushbutton d together with
frame e onto the insert while the mains voltage is
disconnected.
Important
The distance from electrical appliances (e.g. micro-
wave oven, hi-fi and TV sets) must be at least 0.5
m.
To prevent saturation of the radio receiver (actua-
tor), the radiocontrol pushbutton must be at least 1
m away from the nearest transmitter.
Learning a Radio Transmitter
During programming of a transmitter, the sensitivity of
a radiocontrol receiver is reduced to a range of ap-
prox. 5 m. The distance between the radio-control
pushbutton and the transmitter to be programmed
should be between 0.5 m and 5 m.
Procedure
1. Switch off the load connected to the radio-control
pushbutton by a brief depression (< 0,4 s) of any of
the two pushbutton rockers.
2. Depress both rockers of the radio-control pushbut-
ton at the same time for abt. 4 seconds (fig. B: dou-
ble-sided operation) to switch over to the program-
ming mode.
The programming mode is active for abt. 1 minute
and confirmed by an intermittent tone (fig. C).
3. Send a radio telegram from the selected transmit-
ter (fig. D); see „Radio-control transmitter“ operat-
ing instructions:
Programming a channel
Depress the channel key for more than 1 second.
Programming a lightscape key
Depress the lightscape key for more than 3 sec-
onds.
Programming a detector
Remove the battery for about 2 minutes from the
detector.
Put the the battery back in place and make a move-
ment inside the detection range of the detector
within the next 15 minutes.
Programming a presence detector
Remove the battery for about 2 minutes from the
transmitter.
After putting the battery back in place, the device
starts transmitting programming telegrams for
about 30 s.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gira 0543 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gira 0543 in the language / languages: English as an attachment in your email.

The manual is 0,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gira 0543

Gira 0543 User Manual - German - 6 pages

Gira 0543 User Manual - Dutch - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info