Manual Giordani Metropolitan (page 25 of 50) (English, Dutch, French, Italian, Portuguese, Spanish)

769000

Zoom out

Zoom in

1/50

48 49

MAINTENANCE

The seat can be cleaned with soap snd lukewarm

water. Do not use any abrasive detergents. The cov-

er must be washed by hand (maximum 30°C). Do

not use a dryer. The belt buckle can be cleaned

using warm water. Do not lubricate. To ensure opti-

mum and safe use of car safety seats, they should

not be used for longer than 5 years after the date of

purchases. Ageing of the plastic,for instance, under

the inuence of sunlight (UV), may quite unnotice-

ablyreduce the qualities of the product. Once the

child has grown out of the seat,we therefore advise

you to no longer use the car seat and to dispose of

it in proper way.

MATERIALS

Cover: 100% polyester

Frame: aluminum

SIZES

L: 86 cm;

H: 60 cm;

D: 107 cm.

WARNINGS

• This product is suitable for children from birth

to approximately 9 months (0-10kg).

• For car seats used in conjunction with a chas-

sis, this vehicle does not replace a cot or a bed.

• Should your child need to sleep, then it should

be placed in a suitable pram body, cot or bed.

• To prevent your child from falling out of the

seat. Always check to make sure the carrying

handle is “clicked” into carrying positions be-

fore lifting the seat. Also make sure your child

is always strapped securely with the harness

belt.

• The correct rooting of the seat belt along the

blue markings on the product is essential for

your child’s safety. Please see the installation

section. Never thread the belt in any other way.

• Never use this product on a seat equipped with

a front airbag.

• When installing with the seat belt, only use the

car seat on forward facing seat that has been

provided with an automatic or static 3-point

belt. The belt provided has been approved ac-

cording to the ECER16 standard or similar.

• It may be used in the front seat and in the

back seat. We strongly suggest to be used in

the back seat. Always place the product rear-

ward-facing.

• We strongly advise against using a second-

hand product, as you can never be sure of its

history.

• In order to prevent damage to the cover, do not

remove the logos or airbag sticker.

• The child restraint must not be used with-

out the cover. The seat cover should not be

replaced with any other than the one recom-

mended by the manufacturer, because the cov-

er constitutes an integral part of the restraint

performance.

• It is a safety product that is only safe when

used according to the instructions given in this

manual. Do not make any alternations to the

device without the approval of the competent

authority.

• Any luggage or other objects liable to cause

injuries in the event of a collision shall be prop-

erly secured.

• Do not use any load bearing contact points

other than those described in the instructions

and marked in the child restraint.

FOR TECHNICAL OR COMMERCIAL REASONS,

GIORDANI RESERVES THE RIGHT, AT ANY

TIME AND ALSO ONLY IN A SPECIFIC COUNTRY,

TO MODIFY THE TECHNICAL CHARACTERISTICS

OF THE MODELS DESCRIBED IN THIS LEAFLET,

AND/OR THE SHAPE, TYPE AND NUMBER OF THE

ACCESSORIES SUPPLIED

GIORDANI METROPOLITAN SISTEMA MODULAR (DE 0 A 36 MESES APROX.)

SILLA DE PASEO

APERTURA DE LA SILLA DE PASEO

1. Sacar el gancho que mantiene la silla de paseo cerra-

da, tal y como se indica en la Fig. 1a/1b/1c/1d. Se-

guidamente levantar el manillar como muestra la e-

cha: la silla de paseo quedará completamente abierta

cuando se escuche un clic.

MONTAJE DE LAS RUEDAS

2. Montaje de la rueda delantera: insertar los ejes de

la rueda delantera en los huecos delanteros, como se

muestra en la Fig. 2a; los ejes quedarán correctamen-

te jados cuando se escuche un CLIC.

Montaje de la rueda trasera: insertar los ejes de la

rueda trasera en los huecos traseros, como se mues-

tra en la Fig. 2b; los ejes quedarán correctamente

jados cuando se escuche un CLIC.

ATENCIÓN: antes del uso, intentar mover y girar ma-

nualmente las ruedas para asegurarse de que estén

todas correctamente jadas en sus respectivos hue-

cos.

MONTAJE DEL ASIENTO

3. Fijar el velcro en el sentido indicado por la echa en la

Fig. 3a y seguidamente enganchar el botón a la parte

inferior de la colchoneta de la silla de paseo. Ahora el

asiento está completamente montado, tal y como se

muestra en la Fig. 3b.

4. Montaje del asiento: fijar al mismo tiempo los dos

adaptadores A del asiento a la base de sujeción,

como se muestra en la Fig. 4a; las dos partes que-

darán fijadas al unísono de manera estable cuando

se oiga un CLIC.

5. Fijación del soporte del reposapiés: apretar con

el dedo en ambos lados de los enganches C, como

muestra la Fig. 5a, y empujar el soporte D en el conec-

tor de plástico. El soporte quedará jado de manera

estable cuando se oiga un CLIC (ver Fig. 5b).

6. Fijación de la barra frontal: coger la barra frontal y

apretar al mismo tiempo los botones blancos situados

en ambos lados de la misma, como se muestra en la

Fig. 6a. Seguidamente proceder con la jación de la

barra frontal en los dos lados de la silla de paseo, hasta

que se oiga un CLIC.

7. Tal y como muestra la Fig. 7a/7b/7c, abrir la crema-

llera de la capota siguiendo el sentido de la echa,

y empujarla hacia delante: la silla de paseo quedará

estable y correctamente abierta.

MONTAJE Y DESMONTAJE DE LA CAPOTA

8. Para quitar la capota: coger el elemento de plástico C

y sacarlo del canal D que contiene el elemento de plás-

tico, como indica la echa (ver Fig. 8d/8e); ver Fig. 8a,

sacar el tejido de la capota como muestra la echa (ver

Fig. 8f), sacar la barra de hierro E del canal que con-

tiene el elemento de plástico, como se muestra con la

echa; ahora la capota puede quitarse completamente.

9. Montar la capota: ver Fig. 8a/8b. Insertar el extremo

posterior A del tejido de la capota e introducirlo en el

canal de la silla B, con una mano presionar y empujar el

tejido en el canal y al mismo tiempo, con la otra mano,

tirar de la parte delantera del tejido, tal y como muestra

la echa: la capota está ahora montada. Ver Fig. 9a, in-

sertar la guía de la capota en la correspondiente base,

como muestra la echa, asegurándose de que el punto

G de la base esté jado en el oricio de la guía. Ver la

Fig. 9b/9c/9d. Insertar el extremo delantero B del tejido

de la capota en la parte frontal del tubo de la capota

y jar el tubo en el canal de la guía, como muestra la

echa; ahora la capota está completamente montada

(ver Fig. 8).

FUNCIONAMIENTO DEL MANILLAR

10. Regulación en altura del manillar: ver Fig. 10, apretar

el pulsador con una sola mano y levantar el manillar

hacia arriba o hacia abajo. Se aconseja regular la al-

tura del manillar.

ASIENTO RECLINABLE

11. Desbloqueo rápido del asiento: vver Fig. 11a/

11b/11c. Presionar al mismo tiempo el retén de se-

guridad en ambos lados de la silla y levantarlo. La

silla puede retirarse rápidamente o ser colocada en

sentido contrario.

ATENCIÓN: mantener a los niños alejados de la si-

lla de paseo mientras se esté desenganchando el

asiento.

REGULACIÓN DEL ASIENTO

12. Presionar el dispositivo de regulación sobre el res-

paldo o bien girar la manivela, el ángulo del respaldo

se puede regular. La silla puede regularse en 4 posi-

ciones.

TRANSFORMACIÓN DE ASIENTO EN SUAVE CAPAZO

13. Lo primero que hay que hacer es darle la vuelta al

asiento, como se muestra en la Fig. 13a. Presionar

el pulsador 1 para regular el asiento en posición ho-

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Giordani Metropolitan in the language / languages: English, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 11,47 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Giordani Metropolitan Manual

Product: