Manual Giordani Metropolitan (page 22 of 50) (English, Dutch, French, Italian, Portuguese, Spanish)

769000

Zoom out

Zoom in

1/50

42 43

GIORDANI METROPOLITAN MODULAR SYSTEM (FROM 0 TO 36 MONTHS APPROXIMATELY)

STROLLER

HOW TO OPEN THE STROLLER

1. According to Fig. 1a/1b/1c/1d, release the

folding hook, which keeps the stroller closed.

And then lift up the handle as the arrow

shown, the stroller will be opened fully when

you hear a CLICK.

ASSEMBLE THE WHEELS

2. Assemble front wheel: as the show on Fig. 2a

Fix the front wheel axles into front legs hous-

es it is xed when you hear a CLICK.

Assemble rear wheel: as the show on Fig.

2b x the real wheel axles into the rear wheel

houses, it is xed when you hear a CLICK.

ATTENTION: Please try to move and rotate

all the wheels by your hand to make sure all

the wheels are rmly xed on wheel houses

before use.

SEAT UNIT ASSEMBLY

3. Fasten the Velcro in the direction of arrow as

shown on Fig. 3a, and then attach the button to

the bottom of the seat pad. The seat unit is now

completely assembled, as shown on Fig. 3b.

4. Seat unit assembly: As shown on Fig. 4a, x

both adaptors A of the seat unit onto the seat

supporting base B simultaneously; they are

xed together rmly when you hear a “CLICK”.

5. How to x the leg of footrest: According to

Fig. 5a, press both sides of clips C with your

finger, then push the leg D into the plastic

connecting parts, it is xed when you hear a

“CLICK” (see Fig. 5b).

6. How to x the font handrail: As shown on

Fig. 6a, grip the handrail and press down the

white buttons on both sides simultaneously,

and then x the handrail onto both sides of

stroller, it is xed when you hear a “CLICK”.

7. As shown on Fig. 7a/7b/7c, unzip the canopy

in the direction of arrow, then push the canopy

forward, the stroller is rmly opened.

HOW TO ASSEMBLE AND DISASSEMBLE

THE CANOPY

8. Canopy detachment: Hold the plastic C and

push it out from the plastic holder slot D as the

arrow shown, see Fig. 8d/8e; See Fig. 8a, pull

out the canopy fabric as the arrow shown, see

Fig. 8f, pull out the iron bar E from the plastic

holder slot as the arrow shown, the canopy

can be detached completely.

9. Canopy assembly: See Fig. 8a/8b Insert the

rear-end A of canopy fabric into the seat slot

B, one hand press and push the fabric into the

slot and another hand pulling the front of fab-

ric at the same time as the arrow shown, the

canopy can be assembled. See Fig. 9a, insert

the canopy post into the canopy base as the

arrow shown, make sure the dot G of base

xed in the hole of post. See Fig. 9b/9c/9d,

Insert the front-end B of canopy fabric into

the front of canopy tube, then x the tube to

the slot of canopy post as the arrow shown,

canopy be assembled completely, see Fig. 8.

HANDLE FUNCTION

10. Handle height adjustment: see Fig. 10, press

down the one-hand-button, pull up or down

the handle. It is convenient to adjust the han-

dle height.

REVERSIBLE SEAT

11. Quickly release seat unit: see Fig. 11a/

11b/11c, press down the safety lock on both

side of seat at the same time and lift it up. The

seat can take down quickly or put the seat unit

on the contrary direction.

ATTENTION: Keep your child away from stroller

when you want to release the seat unit.

ADJUSTABLE SEAT

12. Press down the adjustor on backrest or rotate

the knob, the angle of the backrest is adjustable.

The seat can be adjustable in 4 positions.

THE CONVERSION OF SEAT UNIT

TO SLEEPING COT

13. Firstly, reverse the seat unit as shown on pic

13a, and press button 1 to adjust the seat

unit to horizontal position, then press button

2 in B way as shown on pic 13b, and nally

release the buckle 3 as shown on pic 13c to

change the seat unit into the sleeping cot as

shown on pic 13d; on the contrary, rotate the

button button 2 clockwise in A way, and fast-

ern the buckle 3 to change the sleeping cot

into the seat unit.

Kindly remind: In order to ensure your baby

safe, always keep the sleeping cot face to you

when using it (see Fig. 13d).

BACKREST AND FOOTREST FUNCTION

14. Press down the footrest buttons and move it

up and down, the footrest can be adjustable in

3 positions, see Fig. 14a.

QUICK RELEASE THE FRONT HANDRAIL

15. See Fig. 15a. Press down the button on both

side, then pull out the handrail and the hand-

rail can be released quickly.

WHEELS FUNCTION

16. Front Wheel Lock: Pull the front wheel lock-

ing lever as the direction of arrow when hear

a “CLICK” the wheel is locked in placed, as

shown in Fig. 16a.

17. Front wheels quickly taken-o: Pre down the

Front wheel quickly-release button, the front

wheels will be released automatically.

18. Rear wheels brake: To apply the brakes by de-

pressing the lock lever as shown on Fig. 18a,

depress the brake lever in the same way to

release the stroller. (Red means in brake con-

dition, Green means in movement condition).

19. Detachable rear wheels: As shown on Fig.

19a, press the quick release button as the

direction of arrow, then you can pull out the

wheels quickly.

SAFETY BELT ASSEMBLY

20. Pass the buckles of shoulder belt A and waist

belt B through the loops located on the seat

pad and the sti board which hided in side of

seat pad. Make sure they are attached rmly

before use (see Fig. 20a/20b).

21. Adjust the safety belt height, please pull out

the colth which mark in Fig. 21a. And then the

installation method same as the rst points

which is shown in Fig. 20a/20b.

22. Pass the crotch belt through the seat pad and

the sti board which hided in side of seat pad

as the arrow shown on Fig. 22a. Always make

sure they are attached rmly before use. The

safety belts are correctly assembled as Fig.

22b.

SAFETY BELT DETACHMENT

23. Detach the shoulder belt H and waist belt I by

pulling out the buckles from the seat pad (see

Fig. 23a).

ATTENTION:

- Please remove the seat belt from the stroller

while using as a sleeping cot.

- Please assemble all the seat belt fastenly in

the stroller while using as a seat.

ATTACH THE BUCKLES

24. Attach the buckles: (See Fig. 24a), attach

the buckles on the shoulder belt (C, D) on

the buckles of waist belt (A, B), And then at-

tached the waist buckles on the central buck-

le E until you hear a CLICK (See Fig. 24b).

Release the belt: (See Fig. 24a), press down

the central button to release the waist strap.

Adjust the seat belt: Adjust the shoulder and

waist strap according to the size of child in

comfortable position (See Fig. 24c) .

25. The height of shoulder belt is adjustable by 2

positions (see Fig. 25a), the lowest position

(position 2) is only for the baby under 6 months,

and the position 1 are for the baby between 6

months and 36 months.Adjust the height of

seat belt by pulling buckles out of the seat.

Then attach them into the same level, always

make sure the buckles are in their positions.

Kindly remind: Always use the safety harness

when the child is in the baby stroller.

OPTIONAL ACCESSORIES

HOW TO USE THE CAR SEAT

26. Assemble the car seat: According to Fig. 26a,

put the car seat onto the seat supporting base,

push down the car seat until you hear a CLICK.

27. Disassemble the car seat: Release the addi-

tional safety lock and raise the button with your

hand as shown in the picture; lift the child seat

upwards with the other hand at the same time

using the handle to unhook the seat from the

frame (see Fig. 27a).

Kinder Reminder: For security reasons, it is

necessary to check again the pull clasp after x

the car seat onto the stroller frame, if the pull

clasp doesn’t return completely, please push

the plastic part to the end.

HOW TO USE THE CARRY COT

28. Assemble the carry cot: Put the carry cot onto

the supporting bases of the stroller, then push

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Giordani Metropolitan in the language / languages: English, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 11,47 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Giordani Metropolitan Manual

Product: