650720

Gingko Slab click clock Manual

2
Zoom out
Zoom in
Previous page
1/13
Next page
ENGLISH
It looks like a plain block of wood, but make a sound (clap your hands or tap on the top) and it will light up instantly with the time, date
and temperature, which display alternately. The clock can be set to display continually or to display for a few seconds when you make a
sound. Press the 'V/S' button at the back to turn on/off the sound activation function. It's strongly recommended to have sound activation
function turned ON to save more energy or save batteries life.
PRODUCT FEATURES
Displays Time, Date, and Temperature alternately, and can also be set to display time only
Sound activated.
12 and 24 hour formats can be selected (initial mode: 24 hour).
Alarm clock with “beep” sound lasting 1 minute.
5/ 7 days alarm with snooze function
The LED display will be off but the clock will still be running.
In-built rechargeable lithium battery to have a wire-free display
INSTALLATION
1, Take the clock and plug adapter from the package and place it in a safe place
2, Switch on the clock by switching the power on at the back of the clock to the ON direction, then LED display will instantly light up on
the front of the clock.
3, Please do not plug the clock into the mains unless there is no LED display on the screen after you switch on the power at the back.
3, When the LED display is on, please go to the setting instructions to set your clock.
CLOCK CHARGING INSTRUCTIONS
1, The clock has been initially fully charged when you open the packaging box and the battery should last 7 days if in permanent display
mode and approximately 3 months in sound activation display mode.
2, The LED display will start to faint when the clock has low battery. You will need to recharge the clock as soon as possible;
3, Please only use the DC/AC adapter included with the clock to charge the clock; when the clock is charging, the red charging indication
LED light will light up. When it’s fully charged, the LED light will turn green.
4, Charging time can take up to 3-4 hours. Please remove the charging adapter when it’s fully charged.
5, We advise you to set the clock on sound activation display to save energy, unless you really need to have it on permanent display.
6, You can also use the charging DC adapter to power the clock rather than using the built-in rechargeable battery.
2 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gingko Slab click clock at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gingko Slab click clock in the language / languages: English, German, French as an attachment in your email.

The manual is 0,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info