783843
15
Zoom out
Zoom in
Previous page
1/18
Next page
32
EMC
Note:
The device is subject to special EMC precautions and it must be installed and used in accordance
with these guidelines.
The electromagnetic eld can affect the device performance, so other equipment used near the de-
vice must meet the corresponding EMC requirements. Mobile phones, X-rays or MRI devices are
possible interference source, as they can emit high-intensity electromagnetic radiation.
Refer to above chapters for the minimum value of users physiological signal. Inaccurate result will
appear when the device operates with the values lower than the descriptions in above chapter
The use of ACCESSORIES, transducers and cables other than those specied, with the exception
of transducers and cables sold by the MANUFACTURER of the ME EQUIPMENT or ME SYSTEM
as replacement parts for internal components, may result in increased EMISSIONS or decreased
IMMUNITY of the ME EQUIPMENT or ME SYSTEM.
The device should not be used adjacent to or stacked with other equipment and that if adjacent or
stacked use is necessary, it should be observed to verify normal operation in the conguration in
which it will be used.
Devices or systems may still be interfered by other equipment, even if other equipment meets the
requirements of the corresponding national standard.
Basic performance: SpO2 measured range: 70% ~ 100%, absolute error: ±2%; PR measured range:
30 bpm ~ 250 bpm, accuracy: ±2 bpm or ±2%, whichever is greater.
The following cable types must be used to ensure that they comply with interference radiation and im-
munity standards:
APPENDIX 1
ENGLISH
N. Name Cable length(m) Shielding or not Remark
1 USB cable 1,0 Yes
2SpO2 probe 1,5 No
State Prompt condition delay Prompt signal generation delay
Low voltage prompt 1 s 20 ms
SpO2 prompt 330 ms 20 ms
Pulse rate prompt 330 ms 20 ms
Probe error prompt 16 ms 20 ms
Note 2: because pulse oximeter equipment measurements are statistically distributed, only about two-thirds of pulse oximeter equipment
measurements can be expected to fall within ±Arms of the value measured by a CO-OXIMETER.
Note 3: percentage modulation of infrared signal as the indication of pulsating signal strength, patient simulator has been used to verify
its accuracy under conditions of low perfusion. SpO2 and PR values are different due to low signal conditions, compare them with the
known SpO2 and PR values of input signal.
Note 4: optical sensors as the light-emitting components, will affect other medical devices applied the wavelength range. The information
may be useful for the clinicians who carry out the optical treatment.For example, photodynamic therapy operated by clinician.
Note 5: Patient simulator has been used to verify the pulse rate accuracy, it is stated as the root-mean-square difference between the
PR measurement value and the value set by simulator.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gima OXY 50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gima OXY 50 in the language / languages: English as an attachment in your email.

The manual is 1.06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gima OXY 50

Gima OXY 50 User Manual - French - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info