783842
12
Zoom out
Zoom in
Previous page
1/18
Next page
29
Please change the batteries when the low-voltage indicator lightens.
Please clean the surface of the oximeter before use. Use soft cloth
with alcohol to wipe the oximeter rst, and then let it dry in air or wipe it dry.
Please take out the batteries if the oximeter will not be used for a long time.
The recommended storage environment of the device:
ambient temperature: -20ºC~60ºC,
relative humidity 10%~95%,
atmospheric pressure: 50kPa~107.4kPa.
The oximeter is calibrated in the factory before sale, there is no need
to calibrate it during its life cycle. However, if it is necessary to verify
its accuracy routinely, the user can do the verication by means of SpO2
simulator, or it can be done by the local third party test house.
Necessary servicing must be performed by qualied service engineers
ONLY. Users are not permitted to maintain it by themselves.
High-pressure sterilization cannot be used on the device.
Do not immerse the device in liquid.
6.2 Battery Maintenance
Keep the both sides of coin cell clean.
Low temperature may decrease the performance of coin cell, and low
battery indicator may appear early. In such case, please put coin cell into
pocket for warm before use, thus bring it back to normal condition.
Do not let any conductive metal (such as tweezers) contact both sides
of coin cell simultaneously to avoid short circuit.
Charge the coin cell for 8~10 hours each time; ambient temperature should
be 5~40°C.
If the coin cell is full after charging, but its performance decreases
apparently, it means the coin cell is exhausted, please change a new one.
6.3 Cleaning and Disinfecting Instruction
Surface-clean sensor with a soft cloth by wetting with a solution such
as 75% isopropyl alcohol, if low-level disinfection is required, use a 1:10
bleach solution.
Then surface-clean by soft cloth wet with clean water and let air dry
or wipe it dry.
Caution: Do not sterilize by irradiation steam, or ethylene oxide.
Do not use the sensor if it is damaged.
ENGLISH
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gima OXY 10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gima OXY 10 in the language / languages: English as an attachment in your email.

The manual is 0.65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gima OXY 10

Gima OXY 10 User Manual - German - 21 pages

Gima OXY 10 User Manual - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info