783842
2
Zoom out
Zoom in
Previous page
1/18
Next page
19 ENGLISH
Instructions to User
Dear Users,
Thank you very much for purchasing our product. Please read the manual
very carefully before using this device. Failure to follow these instructions
can cause measuring abnormality or damage to the oximeter.
No part of this manual may be photocopied, reproduced or translated
into another language without the prior written consent.
We reserve the right to improve and amend it at any time without prior notice.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful inter-
ference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Warnings
Check the device to make sure that there is no visible damage that may
affect user’s safety or measurement performance with regard to sensors
and clips. It is recommended that the device should be inspected minimally
once a week. When there is obvious damage, stop using the device.
Special attention should be paid while the oximeter is used continuously
under the ambient temperature exceeds 37°C, burning hurt may occur
because of over-heating on the sensor.
An uncomfortable or painful feeling may appear if using the oximeter
continuously on the same place for a long time, especially for poor
microcirculation patients.
It is recommended that the oximeter should not be applied to the same
location for longer than 2 hours. If any abnormal condition is found, please
change the position of oximeter.
Avoid placing the device on the same limb which is wrapped with a cuff
for blood pressure measurement or during venous infusion.
DO NOT clip this device on edema or tender tissue.
The light (the infrared light is invisible) emitted from the device is harmful
to the eyes, so service technician or testee should not stare at the light.
The oximeter is not a treatment device.
When disposing of the monitor and its accessories, the local law should
be followed.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gima OXY 10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gima OXY 10 in the language / languages: English as an attachment in your email.

The manual is 0.65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gima OXY 10

Gima OXY 10 User Manual - German - 21 pages

Gima OXY 10 User Manual - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info