783889
9
Zoom out
Zoom in
Previous page
1/16
Next page
25
As below step:
1. In the boot or shutdown state, short press the MEMO button to view the history of
measured values.
2. An empty memory cell shows “---℃” or “---℉”.
3. Temperature readings can be stored in memory. Up to 50 temperature readings can
be stored into the memory cells and automatically overwrite historical data.
4. In boot mode, press the MEMO button until the LCD display “CLR”, which means
that all stored data is cleared completely.
Parameter settings
This product can be set according to the subjects of different colors and different
environments data to meet the different characteristics of populations or individuals.
As below step:
1. Unit Set-F1
Under the boot mode, long press the MODE button to enter F1, press the “MODE”
or “MEMO”button to switch Celsius and Fahrenheit temperature units, press the
On/Scan button to conrm the unit settings (factory default is Celsius).
2. Fever alert set-F2
Under F1 state ,press On/Scan button to enter the F2, press the “MODE” button to
plus 0.1℃, press the “MEMO” button decrease 0.1 ℃, long press to accelerate the
speed of temperature regulation, and nally press the On/Scan button to save. (The
factory default is 38.1℃).
3. Prompt sound settings-F3
Under F2 state, press On/Scan button to enter F3, press MODE button or MEMO
button to set voice switch, and press the On/Scan button to conrm the settings.
(The factory default is the voice Prompt to open).
4. Exit setting mode
In the F3 mode, press the On/Scan button will automatically turn off the screen, exit
setting.
Prompt sound settings ON/OFF function
Under the boot mode .Short press power on/off button ,at the same time press the
MODE button to take on or take off the Prompt sound function.
Restore to factory setting function
Under the boot mode .Short press power on/off button ,at the same time press the
MEMO button. Until LCD display “rst”. Two seconds later ,former F1-F3 parameter
back to factory setting.
ENGLISH
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gima HTD8816C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gima HTD8816C in the language / languages: English as an attachment in your email.

The manual is 0.49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gima HTD8816C

Gima HTD8816C User Manual - French - 17 pages

Gima HTD8816C User Manual - Spanish - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info