Manual Gilera Fuoco 500 (page 72 of 96) (English)

514537

Zoom out

Zoom in

1/96

2. Be careful to rest the vehicle on its centre stand disabling the front suspension

locking system;

3. With engine off and piston at the bottom dead centre, remove the spark plug, add

1÷2 cc of oil through the opening (adding more oil may damage the engine). Operate

the starter button 1-2 times for roughly 1 second to turn the engine over slowly, then

insert the spark plug again;

4. Empty all fuel; spread antirust grease on the unpainted metal parts; keep the wheels

lifted above the ground by resting the chassis on two wooden wedges;

5. For the battery, follow the procedures described in the «Battery» section.

Recommended products

AGIP CITY HI TEC 4T

Engine oil

SAE 5W-40, API SL, ACEA A3, JASO MA Synthetic oil

Cleaning the vehicle

In order to soften the dirt and mud deposited on the painted surfaces, use a low pres-

sure jet of water. Once softened, mud and dirt must be removed with a soft sponge

for bodywork soaked in lots of water and "shampoo" (2-4% of car shampoo in water).

Then rinse abundantly with water, and dry with a shammy cloth. For the outside of the

engine, use petroleum, a brush and clean cloths. Petroleum can damage paintwork.

Remember that any polishing with silicone wax must always be preceded by washing

CAUTION

DETERGENTS CAN POLLUTE WATER. THE VEHICLE MUST BE WASHED AT A

WASH STATION EQUIPPED WITH A SPECIAL WATER PURIFICATION SYSTEM.

3 Maintenance

How to get to the cooling system and replace water pipes Submitted on 20-11-2021 at 03:59
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gilera Fuoco 500 in the language / languages: English as an attachment in your email.

The manual is 1,27 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gilera Fuoco 500 Manual

Product: