514537
20
Zoom out
Zoom in
Previous page
1/96
Next page
WARNING
EACH KEY HAS ITS OWN AND UNIQUE CODE, WHICH MUST BE STORED BY
THE SYSTEM CONTROL UNIT.
VIOLENT SHOCKS MAY AFFECT THE ELECTRONIC COMPONENTS OF THE
KEY.
IF THE VEHICLE IS SOLD, THE MASTER-HANDGRIP KEY (AS WELL AS THE
OTHER STARTER KEYS) AND THE "CODE CARD" MUST ALSO BE TRANSFER-
RED TO THE NEW OWNER.
Programming the immobilizer system
Below is described the procedure to follow for programming the PIAGGIO IMMOBIL-
IZER system and/or for storing other key codes. The programming procedure should
be carried out with the engine stop switch set to «RUN».
START PROCEDURE
Insert the «MASTER» key into the switch (in "OFF" position), turning it to «ON» po-
sition. After 1 - 3 seconds, turn the key to "OFF" again and pull it out.
INTERMEDIATE STAGE
After extracting the «MASTER» key, insert, within ten seconds, the key that is going
to be programmed and turn it immediately to «ON» position. After 1-3 seconds, turn
the key to "OFF" again and pull it out. In this way, a maximum of 7 keys can be pro-
grammed by repeating the above procedure and keeping the indicated times.
FINAL STAGE
After extracting the key to be programmed, insert the «MASTER» key again and turn
it to «ON» position (perform this operation within the ten seconds following the ex-
20
1 Vehicle
20


Need help? Post your question in this forum.

Forumrules
1

Forum

gilera-fuoco-500

Reset search

  • How to get to the cooling system and replace water pipes Submitted on 20-11-2021 at 03:59

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gilera Fuoco 500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gilera Fuoco 500 in the language / languages: English as an attachment in your email.

The manual is 1,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info