795395
25
Zoom out
Zoom in
Previous page
1/142
Next page
Gigaset N870 IP PRO / Admin IE-UK-International en / A31008-XXXXX-XXXX-X-XX / starting.fm / 8/10/21
Template Module, Version 2.1, 11.08.2020 / Template Basiseinstellungen: Version 3.1 - 07.07.2020
Operation hints
25
DECT manager (with DECT)
Resetting base stations to factory settings via power procedure
The following describes the procedure to reset base stations to factory settings via power proce-
dure. You can use it, if it is not possible to reset the device
via the web configurator (p. 104), for instance because you have forgotten the password
for the web configurator or you are experiencing problems accessing the LAN
via the key procedure (p. 22), for instance because the devices are mounted in a place that
is difficult to access.
Resetting the device to factory settings is performed by interrupting the boot process.
Remove the power supply from the device (unplug the LAN cable or the power supply unit).
Replug the LAN cable or the power supply unit . . . the reboot starts. If the boot process is
not interrupted, the standard reboot is performed.
Interrupt the boot procedure after 30 sec. at the earliest and 40 sec. at the latest.
LED 1 (left) LED 2 (right) Description
0.5 s 0.5 s 0.5 s 0.5 s 0.5 s 0.5 s 0.5 s 0.5 s
Not synchronised, DECT ready
Synchronised, DECT ready
Synchronised, system traffic,
no DECT traffic
Synchronised, DECT or RTP traffic
Synchronised, DECT or RTP overload
Depending on traffic state Connection to the Integrator lost
The following procedure only applies to base stations. For DECT manager/Integrator
you need to use one of the above procedures.
Once The device is reset as Integrator/DECT manager with dynamic IP settings.
Two times The device is reset as base station.
Four times The device is reset as Integrator/DECT manager/base station with dynamic IP
settings.
This procedure resets all the settings you have made for the device. The procedure
deletes the saved data from the base stations and handsets. The base station's assign-
ment to the DECT manager is cancelled. Ongoing calls are cancelled. In the case of an
Integrator/DECT manager the whole configuration is reset.
To enable the restoration of your system configuration after a reset, you should regu-
larly save the configuration data to a file (p. 104).
If you intend to reset the role from base to DECT manager/base station, previously
delete the base at any other system where it was registered before.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gigaset Pro N870E IP PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gigaset Pro N870E IP PRO in the language / languages: English as an attachment in your email.

The manual is 1.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gigaset Pro N870E IP PRO

Gigaset Pro N870E IP PRO User Manual - German - 151 pages

Gigaset Pro N870E IP PRO User Manual - Dutch - 150 pages

Gigaset Pro N870E IP PRO User Manual - French - 151 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info