530564
22
Zoom out
Zoom in
Previous page
1/136
Next page
22
Trouble-shooting
If you have a problem, please read through the list below and check that:
The baby and parent units are both switched on.
The baby and parent units are both connected to the mains adapters and plugged
in, or the batteries are fully charged.
Fault Possible causes Solution
The electricity
supply indicator
LED on the baby
(or parent) unit is
switched o.
THE baby (or parent) unit is
switched o.
The rechargeable batteries on
the parent unit are discharged.
THE baby (or parent) unit mains
adapter is not connected or is
not properly connected.
No electricity supply.
Switch on the baby (or parent) unit.
Charge (or replace) the rechargeable
batteries in the parent unit.
If the units are powered by mains
adapters, check that they are proper-
ly connected to the wall sockets.
Check that there is power to the wall
socket..
No sound emitted
by the parent unit.
No sound emitted by the baby
unit.
VOX mode has been activated.
The parent unit volume has
been set too low.
The batteries on the parent unit
are discharged.
The parent unit is switched o.
The baby unit is activated as soon as
it senses a noise/sound. In all cases,
to check whether it is working, ask
someone to speak into the baby unit
to check that reception is correct.
Switch on the baby and parent units.
Increase the volume on the parent
unit until you can hear the sound.
Charge (or replace) the rechargeable
batteries in the parent unit.
Interference
This may be caused on some
occasions by another similar
appliance emitting nearby.
Electromagnetic interference
(nearby aerials, radio transmitter,
high-voltage cables, etc.).
Move both the baby and parent units
away from similar appliances and/or
move away from this position.
Decrease in range The presence of obstacles, metal
structures, reinforced concrete
walls, etc. between the baby
unit and the parent unit.
The parent unit batteries are
discharged.
Move the baby and parent units
closer together or reposition them
to reduce the number of obstacles,
metal structures, reinforced concrete
walls, etc. between them.
Charge (or replace) the rechargeable
batteries in the parent unit.
Electrostatic or
electromagnetic
noise
Electrostatic or electromag-
netic interference caused by
electrostatic or electromagnetic
elds emitted by other electrical
devices: e.g. mobile or Wi-Fi
phones, etc.
Try to eliminate the source of
interference if possible.
en
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gigaset PA330 Audio at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gigaset PA330 Audio in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info