647790
115
Zoom out
Zoom in
Previous page
1/137
Next page
113
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / appendix_legal_GO.fm / 11/8/17
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Customer service & product warranty – Australia and New Zealand
Operation behind routers with network address translation
(NAT)
In general, no special telephone or router configuration is required when operating a Gigaset telephone with
NAT router. The configuration settings described in this section are only necessary if you encounter one of the
following problems.
No incoming calls are possible via VoIP. Calls to your VoIP phone numbers are not put through.
Outgoing calls via VoIP are not connected.
A connection is established with the other participant, but you cannot hear them and/or they cannot hear
you.
Changing the port numbers for SIP and RTP on your VoIP phone
¥ Connect to the telephone's web configurator using the PC web browser Register Open website Set-
tings – TelephonyAdvanced VoIP Settings Change SIP and RTP port numbers Save settings
Example: Select port numbers that are similar to the standard settings:
¥ Check new settings: Open website SettingsTelephonyConnections . . . the Status of the VoIP set-
tings is displayed
¥ Test to see whether the original problem persists. If the problem does persist, carry out the next step.
Setting port forwarding on the router
Details for enabling a port on the router (example):
To enable the router to perform this port forwarding, the DHCP settings of the router must ensure that the
phone is always assigned the same local IP address.
Answer machine ( p. 43)
No time is specified for a message in the call list.
Date/time are not set. Set the date/time ( p. 86)
The answer machine reports "Invalid PIN" during remote operation.
You have entered the wrong system PIN. Repeat input of system PIN
The system PIN is still set to 0000. Set the system PIN to something other than 0000 ( p. 89)
The answer machine is not recording any messages/has switched to answer only mode.
The memory is full. Delete old messages Listen to new messages and then delete
The SIP and RTP port numbers may not be used by any other application or by any other host in the
LAN and should be completely different to the SIP and port numbers that are usually used (and pre-
set in the phone).
SIP port 49060 instead of 5060
RTP port 49004 to 49010 instead of 5004 to 5010
Protocol Public port Local port Local host (IP)
for SIP UDP 49060 49060 192.168.2.10
for RTP UDP 49004 – 49010 49004 – 49010 192.168.2.10
Protocol The protocol used must be UDP.
Public port Port number/port number range on the WAN interface
Local port The SIP and RTP port numbers set on the phone
Local host (IP) Local IP address of your phone in the LAN
115


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gigaset E630 A GO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gigaset E630 A GO in the language / languages: English as an attachment in your email.

The manual is 1,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gigaset E630 A GO

Gigaset E630 A GO User Manual - German - 142 pages

Gigaset E630 A GO User Manual - Dutch - 32 pages

Gigaset E630 A GO User Manual - French - 146 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info