647790
104
Zoom out
Zoom in
Previous page
1/137
Next page
102
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Web configurator
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / settings_web-conf.fm / 11/8/17
Defining Recall key functions for VoIP (hook flash)
You can specify the function for the Recall key on the web page:
¤ Settings Telephony Advanced VoIP Settings
Your provider may support special performance features. To make use of these features, your
p
hone needs to send a specific signal (data packet) to the SIP server. You can assign this "signal"
as the Recall function to the Recall key on the handsets. Prerequisite: The Recall key is not used
for call transfer (default setting).
If you press this key during a VoIP call, the signal is
sent. This requires that DTMF signalling via
SIP info messages is activated on the phone (see above).
Defining local communication ports for VoIP
The settings for the communication ports are on the web page:
¤ Settings Telephony Advanced VoIP Settings
The following communication ports are used for Internet telephony:
SIP port: The communication port via which the phone receives (SIP) signalling data. The
default standard port number is set to 5060 for SIP signalling.
RTP port: Two consecutive RTP ports (consecutive port numbers) are required for each VoIP
connection. Voice data is received via one port and control data via the other. The default
standard port number is set to 5004 - 5020.
This setting only has to be changed if the port numbers are already being used by other
participants in the LAN. You can then specify other fixed port numbers or port number ranges
for the SIP and RTP port.
If several VoIP phones are operated on the same router with NAT, it makes sense to use randomly
selected ports. The phones must then use different ports so that the router's NAT is only able to
forward incoming calls and voice data to one (the intended) phone. Use the web configurator to
specify a port number range for the SIP and RTP port that the ports are chosen from.
Messaging
E-mail notifications
Save the address of the incoming e-mail server and personal access data for your mailbox in the
base. Specify the time interval at which the phone should check whether the incoming e-mail
server has received new e-mail messages. Specify whether authentication on the incoming
e-mail server should be carried out via a secure connection.
¤ Settings Messaging Email
Message Notification
The LED in the message key on the base connected with the handset indicates when a new
message, e. g. a new e-mail, has been received. You can specify for each individual handset what
k
ind of new message should be displayed.
¤ Settings Messaging Message Notification
104


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gigaset E630 A GO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gigaset E630 A GO in the language / languages: English as an attachment in your email.

The manual is 1,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gigaset E630 A GO

Gigaset E630 A GO User Manual - German - 142 pages

Gigaset E630 A GO User Manual - Dutch - 32 pages

Gigaset E630 A GO User Manual - French - 146 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info