617215
61
Zoom out
Zoom in
Previous page
1/75
Next page
59
Gigaset CL750 / LUG GR en / A31008-M2703-T101-1-8U19 / appendix_legal.fm / 7/9/15
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Customer Service & Assistance
The handset does not ring.
The ringtone is deactivated. Activate ringtone ( p. 52)
Call forwarding is set. Switch off call forwarding ( p. 21)
The telephone does not ring if the caller has withheld his number.
¥ Activate the ringtone for anonymous calls ( p. 37).
The telephone does not ring during a specific period or for certain numbers.
¥ Check the time control for external calls ( p. 37)
You cannot accept a call when you remove the handset from the charging cradle
Auto Answer is switched off. Switch Auto Answer on ( p. 51)
No ringtone/dial tone from the fixed line network.
Incorrect phone cable. Please use the phone cable supplied or ensure that the pin connections are cor-
rect when purchasing from a retailer ( p. 64).
The connection always terminates after approx. 30 seconds.
A repeater (earlier than Version 2.0) has been activated or deactivated ( p. 47). Switch the handset
off and back on again ( p. 10).
Error tone sounds after system PIN prompt.
You have entered the wrong system PIN. Repeat the process, reset the system PIN to 0000 if required
( p. 57)
Forgotten system PIN.
¥ Reset the system PIN to 0000 ( p. 57)
The other party cannot hear you.
The handset is "muted". Activate the microphone again ( p. 19)
Some of the network services do not work as specified.
Features are not enabled. Contact the network provider for details.
The caller's number is not displayed.
Calling Line Identification (CLI) is not enabled for the caller. The caller should ask the network provider
to enable Calling Line Identification (CLI).
Calling Line Identification Presentation (CLIP) is not supported or enabled by the network provider.
Ask the network provider to enable Caller Line Identification Presentation (CLIP).
The telephone is connected via a PABX or a router with an integrated PABX (gateway) that does not trans-
mit all information.
¥ Reset the system: Briefly pull out the power plug. Reinsert the plug and wait until the device restarts.
¥ Check the settings on the PABX and activate caller display, if necessary. To do this, search for terms such
as CLIP, calling line identification, telephone number identification, caller ID, ... in the system user guide
or ask the system manufacturer.
You hear an error tone when keying in (descending tone sequence).
Action has failed/invalid input. Repeat the process. Read the display and refer to the user guide if nec-
essary.
You cannot listen to messages on the network mailbox.
Your PABX is set to pulse dialling. Set your PABX to tone dialling.
You cannot switch the network mailbox on/off.
The network mailbox is activated/deactivated by your network provider.
¥ Use the number and functions of your network provider, or enquire there if necessary.
No time is specified for a message in the call list.
Date/time are not set. Set the date/time.
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gigaset CL750 Sculpture at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gigaset CL750 Sculpture in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gigaset CL750 Sculpture

Gigaset CL750 Sculpture User Manual - German - 80 pages

Gigaset CL750 Sculpture User Manual - Dutch - 78 pages

Gigaset CL750 Sculpture User Manual - French - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info