580357
27
Zoom out
Zoom in
Previous page
1/36
Next page
24
Base station settings
Gigaset C460 / BT / A31008-M1706-L151-2-7619 / settings_bs_hs_pabx.fm / 20.2.06
When the alarm clock rings…
Alarm repeat after 5 minutes
§Snooze§ Press the display key or any key.
If you press
§Snooze§ three times the alarm clock
switches off for 24 hours.
Switching off the alarm clock for 24 hours
§Off§ Press the display key.
Restoring the handset default
settings
You can reset any individual settings and
changes that you have made. This will not
affect entries in the directory, calls list, or SMS
lists or the handset's registration to the base
station.
§Menu§ ¢ Settings ¢ Handset ¢ Reset Handset
§OK§ Press the display key to confirm.
a Press and hold (idle status).
Cancel the reset with
a.
Base station settings
The base station settings are carried out using a
registered Gigaset C46 handset.
Changing the system PIN
You have to enter the system PIN when register-
ing a handset to the base station.
You can change the base's 4-digit default sys-
tem PIN ("0000") to a 4-digit PIN known only to
yourself.
§Menu§ ¢ Settings ¢ Base ¢ System PIN
~ Enter your new system PIN and
press
§OK§. For security the PIN is
shown as four stars (
****
).
a Press and hold (idle status).
Restoring the base station to
factory settings
When the settings are restored all handsets are
de-registered. Each individual setting is
restored. Only the date and time are retained.
Resetting the base station using the menu
§Menu§ ¢ Settings ¢ Base ¢ Base Reset
§OK§ Press the display key to confirm.
Resetting the base station using a key on
the base station
¤ Remove the base station mains adapter
(page 4) from the power socket.
÷ Press the registration/paging key
(page 1)and hold down.
¤ Replug the mains unit into your power
socket.
÷ Continue to press the registration/
paging key (page 1).
¤ Release the registration/paging key
(page 1). The base station has now been
reset.
Operating the base station on
the PABX
The following settings are only needed when
your PABX requires them. Please refer to the
user guide for your PABX.
You cannot send or receive SMS messages on
PABXs that do not support Calling Line Identifi-
cation.
Dialling modes and flash time
Changing the dialling mode
You can set the dialling mode.
§Menu§ 4IO11
~1
§OK§ Pulse dialling mode (DP).
Or:
~Q§OK§ Touch tone dialling (DTMF).
a Press and hold (idle status).
Setting the flash time
You can set the flash time.
§Menu§ 4IO12
~
Enter digits for the flash time and
press
§OK§.
Q =80ms; 1 = 100 ms; 2 =120ms;
3 = 180 ms; 4 = 250 ms;
5 = 300 ms;
L = 600 ms; M = 800 ms
a Press and hold (idle status).
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gigaset C460 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gigaset C460 in the language / languages: English as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gigaset C460

Gigaset C460 User Manual - French - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info