580357
9
Zoom out
Zoom in
Previous page
1/36
Next page
Gigaset C460 / BT / A31008-M1706-L151-2-7619 / starting.fm / 20.2.06
6
First Steps
¤ To charge the batteries, leave the handset in
the charging cradle on the base station.
For questions and problems see page 26.
Initial charging and discharging of
batteries
Battery charging is indicated in the top right of
the display by a flashing battery icon
e, V
or
U. During handset operation, the battery
icon indicates the charge status of the batteries
(page 1).
The correct charge status can only be displayed
when the batteries are first fully charged and
discharged through use.
¤ To do this, leave the handset in the base
without interruption until the battery icon
stops flashing in the display (approx. 13h).
¤ Once the batteries are fully charged, remove
the handset from the base and do not put it
back again until the batteries are fully dis-
charged.
Please remember:
u Always repeat the charging and discharging
procedure if you remove the batteries from
the handset and re-insert them.
u The batteries may warm up as they are
charging. This is not dangerous.
u After a time the charge capacity of the bat-
teries will decrease for technical reasons.
Setting the date and time
§Menu§ ¢ Settings ¢ Date/Time
~ Enter the day, month and year
with 6 digits and press
§OK§. Use
q to move between the fields.
~ Enter hours and minutes with 4
digits (e.g. 0 7 1 5 for 07.15 hrs)
and press
§OK§. Use q to move
between the fields.
Once the phone is registered and the time
set, the idle display looks as shown on
page 1.
Your phone is now ready for use.
Belt clip and headset
By using a belt clip and headset (optional) you
can easily make your mobile phone a constant
companion both inside the building and in its
immediate vicinity.
Attaching the belt clip
There are notches for attaching the belt clip on
the side of the handset at approximately the
same height as the display.
¤ Press the belt clip onto the back of the hand-
set so that the protrusions on the belt clip
engage with the notches.
Connection socket for headset
You can connect the following types of headset
(with jack connector): HAMA Plantronics M40,
MX100 and MX150.
Please note:
Automatic registration is not possible when the
base station on which you wish to register the
handset is being used to make a call.
A key press cancels automatic registration.
If four handsets are already registered to the base
station there are two options:
The handset with the internal number 4 is in
idle status: the handset you wish to register is
assigned the number 4. The handset that was
previously number 4 is de-registered.
The handset with the internal number 4 is
being used: the handset you wish to register
cannot be registered.
If automatic registration does not work the hand-
set will have to be registered manually (page 20).
Please note:
The handset may only be placed in the base pro-
vided for it.
If the handset has switched itself off because the
batteries are flat and is then placed in the cradle,
it will switch itself on automatically.
Please note:
After the first battery charge and discharge you may
replace your handset in its base after every call.
Please note:
You will find explanations for the symbols and typo-
graphical conventions used in this user guide in the
appendix, page 26.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gigaset C460 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gigaset C460 in the language / languages: English as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gigaset C460

Gigaset C460 User Manual - French - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info