706827
12
Zoom out
Zoom in
Previous page
1/96
Next page
Template Module, Version 1.3, 11.04.2019,
Getting started
Gigaset A690IP-AS690IP / LUG-IP MEA en / A31008-M2813-A601-1-UZ19 / starting_IP.fm / 10/30/19
12
Setting date and time
Set the date/time so that the correct date and time can be assigned to incoming calls and to
enable the alarm to be used.
¤ Menu Settings OK Date and Time OK Enter the date (day, month and
year) in 8-digit format OK Enter the time (hours and minutes) in 4-digit format OK
(Display: Saved)
Moving the input position to the left or right:
Press the control key to the left/right
Setting up an IP account
So that you are able to make calls via the Internet (VoIP), you must have at least one IP account
with an Internet telephony provider. You can register using the access details you receive from
your provider (user name, authentication name, password, etc.) or using an auto-configuration
code (activation code).
To register the phone with your provider, please use:
The VoIP wizard on the handset
Or the web configurator on a PC or tablet ( p. 62)
Registering using the VoIP wizard on the handset
¤ Press the Message key Yes . . . the wizard starts . . . scroll through the
displayed text OK
The display shows the first of the possible IP accounts (IP 1 to IP 6).
¤ Use to select the required account . . . Accounts already configured are marked with
OK ... Prompt Do you have auto conf code? is displayed
You can configure up to six IP accounts.
If the wizard does not start properly or you have terminated it: Start the VoIP wizard
using the handset menu
¤ Menu Settings OK Tele ph on y OK VoIP Wizard OK
If New firmware available. is shown on the display, there is a firmware update
available for your phone.
To update firmware: Yes ... the new firmware is loaded (takes approx. 6 mins.)
The Message key will then flash again.
¤ To start configuration: Press the Message key .
Registration using an authentication name and password:
¤ No
Registration using an activation code:
¤ Ye s
If no Internet connection can be established, a corresponding error message will be
generated. For more information, see "Questions and answers" Appendix
¤ Terminate the VoIP wizard: OK . . . The VoIP wizard will close Troubleshoot if
necessary Open the wizard again later via the menu to configure the IP account.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gigaset AS690IP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gigaset AS690IP in the language / languages: English as an attachment in your email.

The manual is 0,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gigaset AS690IP

Gigaset AS690IP User Manual - German - 99 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info