795433
15
Zoom out
Zoom in
Previous page
1/24
Next page
15
Gigaset AL415A / Großbritannien / A31008-M2501-L121-1-7619 / Penguin.fm / 5/3/21
Template Bali, Version 1, 16.02.2012
Restoring the base station
When restoring factory settings:
Individual settings are reset.
All lists are deleted.
The No Radiation mode is deactivated.
The date and time are retained. The answering machine is ready for use approx. 15 seconds after the base station has
been reset.
Resetting the base station via the menu
When resetting via the menu
Handsets are still registered.
The system PIN is not reset.
§Menu§ q Settings §O q Base §OK§ q Base Reset §OK§ Reset? §OK§
Resetting the base station using the key on the base station
When resetting the base station using the key on the base station
All handsets are de-registered and
The system PIN is reset to the original code 0000.
Carry out the following steps: Remove the mains cable from the base station. Hold down the registration/paging key
on the base station ( page 1) and reconnect the power cable to the base station at the same time. Hold the key down
for at least 5 seconds.
Operating the base station on the PABX/router
Operating on the router
When operating the Gigaset on an analogue port of a router, you can reduce problems with echoing by activating the
XES Mode ( page 22). If you have no problems with echoing, this function should be deactivated.
Operating on the PABX
The following settings are only necessary when your PABX requires them, see the user guide for your PABX.
When entering the digits, enter them slowly one after the other.
Changing the dialling mode
§Menu§ P#Q5#1N The number for the set dialling mode flashes: 0 = tone dialling (DTMF);
1 = pulse dialling (DP) enter number §OK§.
Setting recall
§Menu§ P#Q5#1Q The number for the current recall flashes: 0 = 80 ms; 1 = 100 ms; 2 = 120 ms;
3 = 400 ms; 4 = 250 ms; 5 = 300 ms; 6 = 600 ms; 7 = 800 ms enter number §OK§.
Changing pause after line seizure
You can set the length of the pause inserted between pressing the talk key c and sending the phone number.
§Menu§ P#Q5#1L The number for the current pause length flashes: 1 = 1 sec.; 2 = 3 sec.; 3 = 7 sec.
enter number §OK§.
Changing the pause after the recall key
§Menu§ P#Q5#12 The number for the current pause length flashes: 1 = 800 ms; 2 = 1600 ms;
3 = 3200 ms enter number §OK§.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gigaset AL415A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gigaset AL415A in the language / languages: English as an attachment in your email.

The manual is 0.54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info