580061
16
Zoom out
Zoom in
Previous page
1/22
Next page
16
Gigaset A590 / SEA / A31008-M2045-Y701-2-7619 / main.fm / 26.05.2010
Deleting the complete phone book
(open phone book)
¢press and hold Ô ¢Ì (confirm action)
¤ To cancel the delete action press Ó before press-
ing
Ì.
Using several handsets
Registering handsets
Before you can use your handset, you must register it
to the base station. You can register up to four hand
-
sets. You must initiate handset registration on the
handset and on the base station.
On the base
¤ Press and hold the paging key Ëfor at least 5
sec.
On the handset
f(open menu)¢ADVANCED SET ¢|
¢REGISTRATION¢|
~
(enter current PIN, default: 0000) ¢|
The handset is assigned the lowest unassigned inter-
nal number (1–4).
Once the handset has been registered successfully, it
returns to idle mode. The name (default: Gigaset) and
the handset’s internal number is shown in the display,
e.g.
Gigaset 1.
If the handset was not registered successfully, the dis-
play will show PLS REG H/S. In this case repeat the pro-
cedure.
Deregistering handsets
Precondition: the handset is in idle mode.
f(open menu)¢ADVANCED SET ¢|
¢UNREGISTER¢|
~
(enter current PIN)¢|
¢p (select handset to be deregistered) ¢|
A long confirmation tone indicates the successful
deregistration. The handset display will show
PLS REG H/S.
Locating a handset ("paging")
You can locate the handsets using the base station.
Precondition: base station is in idle mode.
¤ Briefly press the paging keyË on the base sta-
tion.
All handsets will ring using a specific paging melody.
This also applies if the ringer tones are deactivated.
The displays will show
INTERCOM X .
In case of an incoming call, the handset quits the pag-
ing mode and then rings.
After 30 seconds handset and base station go back to
idle mode.
Ending paging manually
¤ Briefly press the paging key Ëon the base sta-
tion again.
Making internal calls
Internal calls are free calls to other handsets that are
registered to the same base station or to the base sta
-
tion itself.
Making internal calls (handset)
Calling another internal participant
k¢
~
(enter internal number of participant)
0 = base station, 1-4 = handset number, * = all
If only 1 handset is registered you need not enter a
number to call the handset from the base.
Accepting internal call
¤ To answer the call press c.
¤ To end the call, press a.
Incoming call during internal call
An incoming call is indicated by an acoustic signal.
c (answer external call, end internal call) or
k (hold internal call, accept external call)
Press and hold k(start conference)
Internal consultation calls
When you are speaking to an external participant,
you can call an internal participant at the same time
for consultation.
Press and hold k (put external call on hold)
k¢
~
(enter internal number of participant)
You are connected with the internal participant.
k (toggle between internal and external partici-
pant)
Please note
The default system PIN may have been
changed,
(¢ page 19).
The handset name can be changed,
(¢ page 18).
Please note
Do not deregister handsets unless necessary!
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gigaset A590 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gigaset A590 in the language / languages: English as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info