568252
3
Zoom out
Zoom in
Previous page
1/25
Next page
3
MD800
Safety Information
Important Notice
Due to the transmission and reception properties of cellular communications, data can occasionally
be lost or delayed. This can be due to the variation in radio signal strength that results from
changes in the characteristics of the radio transmission path.
Although data loss is rare, the environment where you operate the GSmart MD800 may adversely
affect communications. Variations in radio signal strength are referred to as fading. Fading is
caused by several different factors including signal reflection, the ionosphere, and interference
from other radio channels.
Potential Hazards
Do not operate the GSmart MD800 in an environment that may be susceptible to radio interference
resulting in danger; specifically:
Areas where prohibited by the law.
- Follow any special rules and regulations and obey all signs and notices. Always turn off the
host device and remove the GSmart MD800 from the card slot when instructed to do so, or
when you suspect that it may cause interference or danger.
Where explosive atmospheres may be present
- Do not operate your GSmart MD800 in any area where a potentially explosive atmosphere
may exist. Sparks in such areas could cause an explosion or fire resulting in bodily injury or
even death. Be aware and comply with all signs and instructions.
- Users are advised not to operate the GSmart MD800 while at a refueling point or service
station. Users are reminded to observe restrictions on the use of radio equipment in fuel
depots (fuel storage and distribution areas), chemical plants or where blasting operations are
in progress.
- Areas with a potentially explosive atmosphere are often but not always clearly marked.
Potential locations can include gas stations, below deck on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum gas (such as propane or butane), areas where the
air contains chemicals or particles, such as grain, dust or metal powders, and any other area
where you would normally be advised to turn off your vehicle engine.
Near Medical and life support equipment
- Do not operate your GSmart MD800 in any area where medical equipment, life support
equipment, or near any equipment that may be susceptible to any form of radio interference.
In such areas, the host communications device must be turned off. The GSmart MD800 may
transmit signals that could interfere with this equipment.
On an aircraft, either on the ground or airborne
- In addition to FAA requirements, many airline regulations state that you must suspend
wireless operations before boarding an airplane. Please ensure that the host device is
turned off and your GSmart MD800 is removed from the card slot prior to boarding aircraft in
order to comply with these regulations. The GSmart MD800 can transmit signals that could
interfere with various onboard systems and controls.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gigabyte GSmart MD800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gigabyte GSmart MD800 in the language / languages: English as an attachment in your email.

The manual is 1,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info