792778
13
Zoom out
Zoom in
Previous page
1/100
Next page
13
2.Toepassingen
for hidden projections, dips, road shoulders, etc. beforehand, and take care
not to approach them during work.
21. Be sure to ease off the accelerator pedal at the end of filling in trenches or
areas at the edge of a steep slope or pond bank or at the brow of a hill. When
the external load is reduced, the machine speed will automatically increase,
therefore reduce speed to avoid entering ditches or tipping over.
22. To avoid the machine slipping or tipping over, do not operate the machine on
ungraded or soft terrain, such as land fills. Grade and compact the site before-
hand at all times.
23. Do not run the engine indoors. Carbon monoxide gas from exhaust is color-
less, odorless and deadly.
24. Check that no one is near the machine before starting the engine to avoid dan-
ger from the machine. Check that there are no flammable objects, such as
dead leaves, sheets of paper, or pieces of cloth near to the engine before start-
ing the engine.
25. Be especially careful when reversing and watch the area behind the loader
exactly before starting to drive.
Caution with children
26. Serious accidents can occur if the operator does not pay attention to children
in the vicinity of the machine. Children are unpredictable!
27. Always keep an eye on children as they change their location continuously.
28. Make sure no children are within the working range of the machine.
29. Be extremely cautious when children approach the working area; stop work-
ing, if necessary.
30. Do not carry children on the machine.
31. Do not allow children to operate the machine.
32. Do not allow children to play around the machine.
WAARSCHUWING!
Driving on slopes should be avoided at all times! the risk of tipping
over increases extremely when driving on slopes.
Only drive on slopes when the loader attachment is empty. In the event that the
wheel loader should drive on a slope, the maximum slope angle is 11.3º (20%).
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Giant D267 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Giant D267 in the language / languages: Dutch as an attachment in your email.

The manual is 9.26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info